Spectroscopy services for Monitoring and Testing

We are able to arrange a complex material analysis due to our long-term cooperation with various universities and research institutions. Our products are analyzed mainly by methods mentioned bellow, that are provided by RCPTM (Regional Centre of Advanced Technologies and Materials). There are of course many other methods available.

By NANO IRON s.r.o. based in Židlochovice, CZECH REPUBLIC.

Cooper Environmental is committed to providing high quality, competitively priced analytical results with rapid turn-around-times. We employ energy dispersive X-ray Fluorescence (ED-XRF) as our analytical technique to quantify the metals deposited on filters.

By Cooper Environmental Services based in Beaverton, OREGON (USA).

GTD has built links with a number of technical partners to enable us to carry out research and development; including Shannon ABC, Limerick Institute of Technology and MSSI, University of Limerick.

By Glynn Technical Diamonds Ltd. based in Kilrush, IRELAND.

QUANTACHROME provides the following test methods for the characterization of emulsions from different fields like cosmetics or food:

By Quantachrome GmbH & Co. KG based in Munich, GERMANY.

The Envirotech, Inc. laboratory is a full service environmental laboratory that provides a wide range of analytical services to meet the needs of our broad client base. Our facility and equipment allow us to streamline our analysis to increase productivity and efficiency while providing accurate data to meet your specific requirements.

By Envirotech Inc based in Farmington, NEW MEXICO (USA).

The Microscopy group includes staff and equipment to perform FESEM (Field Emission Scanning Electron Microscopy), which is used for surface structural and cross-sectional analysis. EDX (Energy Dispersive X-Ray Spectroscopy) is used to perform Elemental materials analysis, both qualitative and quantitative. FETEM (Field Emission Transmission ...

By Evans Analytical Group® (EAG) based in Sunnyvale, CALIFORNIA (USA).

Atlanta-based MVA Scientific Consultants provides customized analyses and scientific support to stack testers and their clients in our 14,000 square foot state-of-the-art facility. We specialize in emission sample particle sizing and in particle and back-half catch material identification. Particle sizing of filter samples (e.g. Method 5) and for ...

By MVA Scientific Consultants based in Duluth, GEORGIA (US) (USA).

Our Lab is able to offer a complete line of services for any soil testing needs. We offer high quality, fast, and reliable service through our use of the latest testing methods and technologies. Our lab is equipped with computer interfacing at every workstation to automate the entire process of data collection. Our quality control program allows ...

By Frontier Labs, Inc. based in Clear Lake, IOWA (USA).

As standard practice within our company a Certificate of Analysis is supplied with all ordered materials. X-ray diffraction and spectrographic analyses are carried out for each element and compound. For non-metallic impurities, such as Oxygen, data is available upon request.

By Testbourne Limited based in Hampshire, UNITED KINGDOM.

Synthetics and polymers are existent in different grain sizes and shapes. QUANTACHROME provides the following test methods for the characterization of synthetics and polymers:

By Quantachrome GmbH & Co. KG based in Munich, GERMANY.

Eutech Scientific Services has been carrying out residue analysis testing for over a decade. We offer trace level detection and identification of unknown residues. Our expert staff will provide you with the best strategy to develop a testing regimen. At Eutech, we are committed to provide the highest quality data.

By Eutech Scientific Services Inc based in Highland Park, NEW JERSEY (USA).

For close to half a century Berg has been a valued asset in the Motion Control industry. Like a high quality precision gear, Berg has been the driving force in helping the industry continue to move forward. Our engineering, service and staff of specialists have been catalysts in providing innovative solutions and assistance to our ...

By WM Berg based in Cudahy, WISCONSIN (USA).

Another powerful tool in the ESS source testing toolbox is the use of FTIR Spectroscopy Services. Commonly referred to as FTIR, Fourier Transform Infrared Spectroscopy can be used to identify chemicals from paints, polymers, coatings, spills, drugs, and contaminants (qualitative analysis).

By Environmental Source Samplers, Inc. based in Wilmington, NORTH CAROLINA (USA).

Reaction-monitoring data sets are often quite straightforward, and you can get the information you need from simple peak height:time graphs. Sometimes it is more complex. If substrates and products are spectroscopically similar, you may need to use peak models or even chemometric models to extract rate information. Remspec's VizIR software is set ...

By Remspec Corporation based in Sturbridge, MASSACHUSETTS (USA).

Development and application of sensor systems, e.g. FTIR and laser spectroscopy for process optimization in collaboration with research institutes and universities. Development of safety concepts and system analyses. Calculation, layout and optimization of gas and chemistry supply systems. Layout and documentation using Auto CAD and Solid Works. ...

By Sempa Systems GmbH based in Dresden, GERMANY.

AmTest Air Quality provides a wide range of source testing and consulting services: Air Pollution Control Equipment Evaluations, Air Toxic Studies for HAPs, Ammonia Slip Evaluations, Combustion/Control Device Optimization, Compliance Assurance Monitoring (CAM) Systems, Continuous Emission Monitoring Systems (CEMS), Destruction/Capture Efficiency ...

By AmTest - Air Quality, LLC based in Preston, WASHINGTON (USA).

Industry Need From the mid-1880s through the early 1950s, manufactured gas plants were widely used for generating gas to meet heating and lighting needs in cities and towns throughout the US. Methane, hydrogen, and carbon monoxide were produced from the heating of coal and other ingredients in large brick ovens, and were stored in onsite tanks. ...

By Minnich and Scotto, Inc. based in Freehold, NEW JERSEY (USA).

Airtech understands the complexity of environmental issues faced by a broad range of industries in maintaining and operating its facilities. As a full-service environmental consulting firm, Airtech is 100% involved in the analyses of stationary source air emissions.

By Airtech Environmental Services Inc. based in Elk Grove Vlg, ILLINOIS (USA).

Soleras’ in-house analytical and materials characterization capabilities include the following: ICP-OES (inductively coupled plasma optical emission spectrometry) to detect trace metals. Gas analysis for emission and process monitoring. SEM (scanning electron microscopy) with EDS (energy dispersive spectroscopy) for analysis of materials and ...

By Soleras Advanced Coatings NV based in Deinze, BELGIUM.

Accurate emissions measurement is key to ensuring compliance with facility-construction and operating permits, as well underlying regulatory requirements. Those same measurements, however, can also be used for performance optimization or to produce baseline or evaluation data. AEREON is a recognized leader in providing state-of-the-art testing ...

By AEREON based in Austin, TEXAS (USA).