Stationary Source Monitoring services for Monitoring and Testing

Machine diagnosis means testing the units for vibration. The goal is to extend the units’ run time by measuring their vibration on a regular basis. AERZEN’s alternative is to measure vibration, temperature and RPM with a mobile device, as well as using an integrated system for constant online monitoring.

By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY. from Analysis and Consulting Service line

Capable of performing any type of stationary source test program, AirNova, Inc. routinely conducts source emission test programs for both EPA and State regulatory compliance. These programs are conducted employing all EPA Reference Methods as well as state-specific procedures.

By AirNova, Inc. based in Pennsauken, NEW JERSEY (USA).

The SeaDarQ has been used throughout the world in different configurations. It can be operated from a ship, a platform or an elevated coastal site. It is possible to integrate the system with external equipment such as: ADCPs, current profilers, infrared sensors and cameras. In addition, SeaDarQ provides a tool to store and analyze gathered data ...

By Nortek B.V based in Badhoevedorp, NETHERLANDS.

An environmental review is the process of reviewing a project and its potential environmental impacts to determine whether it meets federal, state, and local environmental standards. The environmental review process allows identification of issues to allow protection of environmental resources, it is not an approval process.

By Bolton & Menk, Inc. based in Mankato, MINNESOTA (USA).

Acta professionals are highly experienced in compliance planning and in scientific, regulatory, and business strategy development for special regulatory programs.

By Acta Group based in Washington, DISTRICT OF COLUMBIA (USA).

Air quality monitoring is a process composed of inter-related activities which include sampling, analysis, data interpretation, and reporting. Air sampling may be generally classified into two types, namely: ambient and source sampling. In ambient air monitoring, the measurements are indicative of only a small portion of the atmosphere and cannot ...

By Apercu Consultants, Inc. based in Quezon City, PHILIPPINES.

Nitrous Oxide (NOx) emissions are becoming a growing concern both in Canada and internationally. North shore is experienced in quantifying NOx emissions from stationary combustion sources, and providing cost effective management and control solutions. Whether you are looking to manage NOx emissions from a single source, across your entire fleet, ...

By North Shore Environmental Consultants based in Calgary, SASKATCHEWAN (CANADA).

Airtech understands the complexity of environmental issues faced by a broad range of industries in maintaining and operating its facilities. As a full-service environmental consulting firm, Airtech is 100% involved in the sampling of stationary source air emissions. With minimal impact on productivity, Airtech can help resolve federal, state, and ...

By Airtech Environmental Services Inc. based in Elk Grove Vlg, ILLINOIS (USA).

Airtech understands the complexity of environmental issues faced by a broad range of industries in maintaining and operating its facilities.  As a full-service environmental consulting firm, Airtech is 100% involved in the monitoring of stationary source air emissions.  With minimal impact on productivity, Airtech can help resolve ...

By Airtech Environmental Services Inc. based in Elk Grove Vlg, ILLINOIS (USA).

Airtech understands the complexity of environmental issues faced by a broad range of industries in maintaining and operating its facilities. As a full-service environmental consulting firm, Airtech is 100% involved in the consulting of stationary source air emissions. With minimal impact on productivity, Airtech can help resolve federal, state, ...

By Airtech Environmental Services Inc. based in Elk Grove Vlg, ILLINOIS (USA).

Air Resource Specialists' (ARS') expertise covers a broad range of modeling and NEPA planning applications to project the impacts of existing or proposed source emissions. Services provided in this area include: Clean Air Act construction, operating, and PSD permits. EIS and regional assessments of multiple source impacts. Emission calculations ...

By Air Resource Specialists, Inc based in Fort Collins, COLORADO (USA).

Airtech understands the complexity of environmental issues faced by a broad range of industries in maintaining and operating its facilities. As a full-service environmental consulting firm, Airtech is 100% involved in the analyses of stationary source air emissions.

By Airtech Environmental Services Inc. based in Elk Grove Vlg, ILLINOIS (USA).

NO/NO2 CEMS (RM 7E) - NOx is measured using a chemiluminescence NO/NO2 gas analyzer. This analyzer measures the intensity of the light given off by the nitric oxide/ozone reaction, where the term chemiluminescence is derived. For measuring NO concentrations only, the gas samples are sent directly to the reaction chamber bypassing the NO2-to-NO ...

By Entech Engineering Inc. based in Houston, TEXAS (USA).

Promet's clients have also come to depend on the strengths of the company's stringent Quality Assurance and Quality Control Program, as well as its preventative maintenance schedule, which includes routine monthly calibrations.

By Promet Environmental Group Ltd. based in Calgary, ALBERTA (CANADA).

Your company plans to operate a new industrial process, but you need to calculate air emissions for an air permit application or health risk assessment required by a regulatory agency. Or, you want to know if air emissions will cause smoke or odors that would be a nuisance to your neighbors.

By BlueScape Environmental based in San Diego, CALIFORNIA (USA). from Air Quality Services Service line

ASTM D6866 is a standard method employing radiocarbon dating techniques to determine the percentage of “recently fixed carbon” (biogenic fraction) versus “old carbon” (non-biogenic fraction from fossil sources) present in a solid fuel or its stack gas emission. Materials in fuels (municipal solid waste, used tires, sewage ...

By Beta Analytic Inc. based in Miami, FLORIDA (USA). from Fuel Tested Service line

Environmental Compliance is a broad term that can include everything from Air Permitting and Wetlands to NEPA and Hazardous Waste Management - and everything in between. Simply knowing which environmental regulations your company must comply with can be hard to figure out. We make it easy. We take the guesswork out of compliance. We identify your ...

By ATOKA, Inc. based in Hot Springs, ARKANSAS (USA). from Environmental Services Service line

In negotiating settlements of civil penalty cases, plaintiffs' attorneys frequently rely on EPA's (and, in some cases, a state's) statute-specific settlement policies to place a monetary value on the gravity component of the penalty. In doing so, they avoid the much more difficult task of quantifying damages to human health and the environment. ...

By Seneca Economics and Environmental Management Network based in Germantown, MARYLAND (USA). from Ability-to-Pay Analysis Service line

Federal and state air permitting, Air compliance audits and reviews, Air emission reporting, Regulatory assistance and applicability.

By M.J. Bradley & Associates LLC based in Concord, MASSACHUSETTS (USA). from Energy and Air Quality Service line

In support of the environmental review process, AKRF analyzes the potential air quality effects of a proposed project on the ambient environment as well as the potential effects from existing air pollution sources on proposed uses, such as new buildings and recreational spaces. AKRF uses advanced modeling techniques to simulate how ambient air ...

By AKRF Inc. based in New York, NEW YORK (USA). from Air Quality Services Service line