Tank Monitoring Articles

  • Instek LTM Probes provide faster response times and superior pulp level monitoring

    Do you need reliable signals with accurate pulp level detection, low maintenance costs AND simultaneously increase your recoveries? Instek Control LTM products provide superior pulp-level interface monitoring through the benefits of conductance technology and advanced digital signal processing logic. Ideal for monitoring froth or foam covered process cells, tanks and sumps, the LTM probe ...


    By Zeroday Enterprises, LLC

  • Case study - Why good incubator management is critical for IVF clinics

    There is a large and growing number of fertility clinics throughout the UK, all registered on the Human Fertilisation and Embryology Authority (HFEA) database.  Each clinic is carefully monitored and assessed by the HFEA to ensure patients are protected and receive a service of high standard – even the clinic’s ‘Success Rates’ and ‘Inspection Reports’ are ...


    By Geotech

  • Fighting Foam in Aeration Tanks

    Just like a poorly poured pint of beer can wreak havoc on your coffee table, excessive foam formation in aeration tanks can create operational challenges for both municipal and industrial treatment plant operators.  In municipal plants, foam formation is common during secondary treatment startup, as the young microbiology is unable to breakdown surfactants associated with soap, shampoo, ...


    By KLa Systems, Inc.

  • Monitor Hull Corrosion with Thickness Gauge

    After our recent article about inspecting your hull paint to reduce bio-fouling and acting as an anti-corrosion method, we wanted to delve deeper into one of the biggest problems shipowners and operators face: corrosion. ...


    By Deep Trekker Inc.

  • Chemically Inclined: The Case for Clean Boilers

    Boiler cleaning is something most companies don’t want to think about — if boilers are working within operational limits it’s often easier to keep up with smaller preventative maintenance (PM) tasks but put off a total chemical clean ...

  • Designed to vs. Certified

    Most bolted steel tank companies use the term “designed to” when referring to industry and quality standards. At Superior Tank Co., Inc. we can positively confirm all of our tanks meet or exceed the expected design and quality objectives. Superior Tank has undergone the very rigorous API SPEC Q1 and ISO 9001:2008 certification process which reviews the various elements of bolted steel ...


    By Superior Tank Co., Inc.

  • Groundwater Monitoring Case Study

    Global has been contracted by the Michigan Department of Environmental Quality, Remediation and Redevelopment Division (MDEQ RRD) to conduct quarterly sampling at a former gas station and adjacent property located near a State of Michigan owned public assess site to Torch Lake. The purpose of the sampling is to assure that there are no impacts to the surface water located downgradient of the ...

  • The Social Responsibility

    Nowadays, companies are seen as environmental agents of change where they operate. These companies are influenced and influence their stakeholders through the impact they have on the environment. For the Oil&Gas market where ISA – Intelligent Sensing Anywhere operates with its remote monitoring and IoT solutions, this market has as main concern safety and reliability. The companies ...

  • Bulk Bag System Design Considerations

    Designing a new Bulk Bag Mix Tank Feed System? Here are some considerations during the design phase that will help meet expectations of plant managers and operators alike: Gravity feed of solution or metering pumps: Depending on the installation, solution/slurry from the mix tank can be gravity fed to process or if discharging into pressure, ...


    By IPM Systems, LLC

  • Guaynabo WTP in Puerto Rico saves thousands with UV254 Monitoring Package - Case Study

    Summary Dealing with fluctuating water sources is not an easy task for plant operators. Seasonal variation, heavy rain fall or accidental contamination events change the raw water quality, requiring immediate attention. This is a familiar scenario for Facility Manager, Nancy Ma. Cáceres Acosta at the Los Filtros Water Treatment Plant in Puerto Rico. She has been producing highquality ...


    By Real Tech Inc.

  • Use of Oxygen Monitors for Nitrogen, Argon, or Cryogenics and Where They Are installed

    An oxygen deficiency monitor or O2 monitor is found in many settings where colorless, odorless gases -- including nitrogen, argon, CO2, and cryogenic gases -- are used. Always monitoring, the oxygen detector can tell when gas levels rise above those deemed safe, and let off a timely alarm. Learn which settings commonly use ...

  • EPA Study: 83% of diesel tanks have moderate to severe levels of corrosion

    The EPA has released the results of the largest survey to-date on corrosion levels in underground storage tanks (USTs) containing diesel fuel -- and the results are staggering. The research showed that 83 percent of the USTs studied exhibit moderate to severe corrosion. Worse, only 25 percent of the owners of those tanks with corrosion were aware of it prior to the study. ...


    By Tanknology Inc.

  • Sustainability evaluation of a primary school rainwater demonstration project in Tanzania

    Water shortages are widely prevalent in developing countries, affecting lives of people including schoolchildren, who miss classes while fetching water for daily use. A typical case was that of Mnyundo Primary School in Tanzania, East Africa. A rainwater harvesting (RWH) system was then constructed because of easy adaptability of the technology. The purpose of this study is sustainability ...


    By IWA Publishing

  • Case Study: 48 Hour Tank Lining Repair

    GUEST BLOG: 48-hour tank lining corrosion repair, thanks to SPI’s fast curing Polyshield HT-100F UB In this post, we focus on a tank lining corrosion repair that’s recently been completed by our 2015 Global Distributor of the Year, SPI Performance Coatings Ltd, of Wiltshire UK. This particular project involved a ...

  • Does the risk of Legionnaire’s Disease rise when there’s lead in your water?

    Ongoing monitoring shows that lead levels in Flint, Michigan’s water are dropping and getting closer to meeting federal safety standards. That’s some much-needed positive news for the community. But there’s still work to be done. Now, researchers are starting to check residential hot water heaters in Flint homes for Legionella. Legionella grows best in warm water and hot water ...


    By LuminUltra Technologies Ltd.

  • Why good incubator management is critical for IVF clinics

    There is a large and growing number of fertility clinics throughout the UK, all registered on the Human Fertilisation and Embryology Authority (HFEA) database.  Each clinic is carefully monitored and assessed by the HFEA to ensure patients are protected and receive a service of high standard – even the clinic’s ‘Success Rates’ and ‘Inspection Reports’ are ...


    By Geotech

  • The Generation of Pure Water

    As a world leading manufacturer of complex multi-port stainless steel diaphragm valves, GEMÜ has earned an excellent reputation in the biotech and pharmaceuticals’ markets. GEMÜ is now transferring the skills acquired in biotech and pharmaceutical applications, to water applications by designing and manufacturing plastic multi-port block valves. The space saving compact build, ...


    By Modern Pumping Today

  • Case study - NAPL forensics analysis at tank farm in Boston

    Ambient Engineering, Inc. (Concord, MA) used Sitelab to investigate and remediate a former tank farm along Boston Harbor contaminated by a large, subsurface plume of commingled diesel fuel and No. 6 fuel oil. Loading racks (above) are suspected to have contributed to most of the site’s contamination. Light Non Aqueous Phase Liquids (LNAPL) collected from 40 monitoring wells were tested ...


    By Sitelab Corporation

  • Global Site Decommissioning - Case Study

    Challenge: A global oil and gas company required final decommissioning at a former terminal and blending facility that had been idle for almost a decade. The 2.5 acre site, located in South Africa, required the removal of all above and below ground structures, underground utilities, process equipment, buildings, concrete slabs and foundations. The objective of ...


    By Antea Group - USA

  • Case study - CO2 monitoring for Kerry Foods

    About the customer Kerry Foods, based in Okehampton, England develops, manufactures and delivers technology based ingredients for the worldwide food and beverage industry The Geotech product G100 CO2 analyser How the company operates The Kerry Foods plant processes food ingredients, such as fruit conserves and confectionery ...


    By Geotech

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you