Telemetry Articles

  • Case Study: Monitoring Fuel Treatment with On-Site Fuel Analysis

    Version 8 of our industry leading SpectrOil Optical Emission Spectrometers offers significant performance improvements and enhanced productivity. In particular the sensitivity of the instrument has been improved markedly to allow detection of trace metals down to the part per billion (ppb) level. This capability is particularly important to power generators using liquid fuel, as high levels ...


    By Spectro Scientific

  • Case study - Remote location requires minimum concept

    A leading power supply provider in Austria took on the project of monitoring water levels at a power plant in Montenegro, in two remote locations where no infrastructure is available for installation. On top of that, site visits could only occur every two months, so a device with remote data transmission capabilities was key. Because of these factors, the customer needed an easy solution for ...

  • Arctic Polar Research - A Global Responsibility

    Due to climate change and geopolitical trends, the Polar Regions (particularly the Arctic) are increasingly becoming the focus of scientific, political, and economic interests. Much of the global climate is driven by forces that originate in the Arctic. The Arctic sea ice is receding faster than climate models have predicted, and the movement of freshwater into and around the Arctic plays an ...

  • ‘Smart’ flood alleviation system protects Portsmouth

    In late 2014, Southern Water completed a major project to reduce the risk of sewer flooding in parts of Portsmouth and Southsea. Substantial works were undertaken to divert runoff and tidal ingress, and a ‘smart’ hydrometeorological monitoring system was installed to enable prompt diversion of excess water during periods of high rainfall. Sewer level monitoring is undertaken in ...

  • Herko saves time and money with a B5 W baler - Case Study

    The automotive company, Herko, located in Miami, Florida, saved up time and space after installing a B5 W baler for cardboard. Herko, a distributor of automotive parts for OEM and Aftermarket now treats their waste as an integrated part of the workflow. The placement of a Bramidan B5 W baler close to their waste source instantly optimized their waste handling solution both from a logistic and ...


    By Bramidan Balers

  • Multi-Site veterinary diagnostic laboratory uses Matrix Gemini LIMS for Seamless sample management case study

    The Matrix Gemini Laboratory Information System (LIMS) from Autoscribe Informatics has been used to co-ordinate sample tracking, management and reporting across four different locations for a busy veterinary diagnostic and clinical pathology laboratory. Background Nationwide Laboratory Services Is a UKAS accredited independent multi-disciplinary veterinary laboratory providing ...


    By Autoscribe Informatics

  • Dual Telemetry with GOES

    Make GOES more effective and reliable with a secondary telemetry option. GOES, for all it’s no-cost, reliable virtues, has some drawbacks. First, it’s a one-way transmission—there’s no way of sending any data to your station. This means there’s no way to reprogram a data logger or reboot a stuck data logger or purge a bubbler without (an unplanned) visit to the site. ...

  • An Overview of Stevens' Approach to Making Remote Communications Simpler, More Flexible and Incredibly Reliable

    The power of the cloud’s simplicity, flexibility and reliability are the attributes at the heart of Measurements to Mind—Stevens’ M2M cloud-based data acquisition vision of shortening the communication path from the sensors to data on-line. What the sensor measures, the mind sees. Products that fly under the M2M ...

  • Unmanned remote and wireless CDM monitoring case study

    Remote and wireless monitoring technology to meet CDM requirements is in its infancy in Europe. Carbon trading is driving it globally, especially in North and South America. That experience and technology is now finding a demand in Europe and Asia in landfill, biogas from food and animal waste in digesters and water treatment sludge digestion. Methane recovery from landfill and anaerobic ...


    By Geotech

  • Case study - Germany/Albstadt: How telemetry cuts the cost of leak detection significantly

    Introduction Albstadt is a town located in southwest Germany, about 80km south of Stuttgart. Albstadtwerke are the utility network distribution provider in this region supplying potable water, natural gas and electricity.  In addition to managing and maintaining the local distribution assets in Albstadt, Albstadtwerke operate and maintain two more potable water distribution ...


    By Gutermann AG

  • Diver-NETZ Reduced operational costs by 97% - Case Study

    Near-real-time monitoring increased efficiency, reduced costs, and delivered critical insight into groundwater resources Challenge Reduce municipal groundwater monitoring costs, improve data quality, and achieve greater insight into groundwater resources. Solution Upgrade existing monitoring network with Diver-NETZ* wireless groundwater monitoring ...


    By Van Essen Instruments

  • Maximizing mining within noise limits the Tomingley Gold Mine case study case study

    Tomingley Gold Operations (TGO) needed to control their noise impact on the nearby community of Tomingley. The mine has great focus on keeping a good relationship with their neighbours and noise control is a prerequisite for obtaining and keeping their Project Approval License. TGO is using Noise Sentinel for 24/7 noise monitoring and management, in combination with a remotely located, ...

  • Levelogger Edge Data Verified in Harsh Conditions of Antarctic Tidal Study

    From April 2013, through December 2013, a Levelogger Edge was used in an Antarctic Tidal Study to monitor sea level fluctuations in the Davis Sea, Antarctica. A unique monitoring setup was implemented for the successful installation of the Levelogger Edge in these extreme climatic ...


    By Solinst Canada Ltd.

  • MK:427 4-20mA Noise Sensor Outdoor Microphone example application case study

    Project Summary A large industrial site required continuous noise monitoring adding to their existing SCADA system. The requirement was for a robust, weather proof solution that gave a continuous 4-20mA output signal with accuracy to Class 1 and with the capability of remote calibration. A number of MK:427 outdoor microphones were integrated quickly into the system to provide ...


    By Cirrus Environmental

  • LinkBus RIMS case study

    For a variety of reasons, decreasing resources are causing plant operators in the process and utility industries to look for more efficient ways of monitoring and servicing their instrumentation. The analyzer maintenance department may have been reduced in size, merged with another department or perhaps no longer exists at all, and reassignments and relocation of staff can lead to a loss of ...

  • How A Wireless Mesh Makes Tank Level Monitoring Easy

    Want to avoid wires? Want to lower the cost of installing sensors? If so, a wireless mesh is a good way to go. It’s a great solution for both remote and local tank level monitoring, and it’s an industrial grade, reliable, and proven technology. What is a wireless mesh? A wireless mesh network is a series of radios that talk to each other. It’s a point to ...

  • RainWise Telemetry MK-lll-LR Air Strip Project - Case Study

    This project required weather data to be monitored at a remote air strip in a valley, which was then sent via the mobile phone network back to Sydney so the owner could monitor weather conditions before flying out to this remote location. The only Next G phone signal was located almost 2km away through dense bush on the side of a hill. The solution required a three part approach; A high quality ...


    By RainWise Inc.

  • Wireless Pakscan controls the flow at Nevada gold mine

    A gold mine in Nevada USA has been able to take advantage of wireless Pakscan digital control for newly installed IQ intelligent electric valve actuators on the water filtration plant. The Newmont underground mine utilises Geotube® dewatering technology to separate sediment from both ground and extraction process water. The filter systems, which are installed above ground, are fabricated from ...


    By Rotork

  • SeNsiM-SEC: secure sensor networks integration to monitor rail freight transport

    In recent years, the interest in monitoring infrastructures has spread in many application domains, even because of the number of natural disasters and terrorist attacks. This important activity can be seen in the general context of critical infrastructure protection, such as the freight trains meant for hazardous materials transportation. The design of these systems must answer to several ...


    By Inderscience Publishers

  • Suez SITA - The purchase of a RQ Box measurement network motivated by a fast ROI case study

    The site Non-hazardous waste storage center Located at Villeneuve sur Verberie, France 200.000 tons of waste processed each year Odor control misting system, 1 kilometer long Challenges To recognize and quantify the odors emitted by the rehabilitated area and the fresh waste area To validate the ...


    By Alpha MOS Environment

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you