Only show results in Massachusetts? Ok

Temperature Monitoring services for Monitoring and Testing

  • Premium

    Preventive Maintenance (PM) Services

    Our preventive maintenance (PM) services give you right-from-the-source expertise. Our factory-trained technicians are skilled in maintaining and upgrading your equipment. Whether Dürr Megtec supplied your equipment or if it was supplied by other manufacturers, a PM with Dürr Megtec can help keep your equipment operating at maximum ...

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA). from Dürr Megtec Services and Support Service line

  • Premium

    Preventive Maintenance and Oxidizer Evaluations Services

    Did you know that some air permits require oxidizer operators to have scheduled maintenance programs for their systems in order to remain in compliance with regulations? The Anguil PME is a thorough audit of a system's operation, covering multiple days and an extensive checklist. Upon completion, customers receive a detailed report with ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA). from Oxidizer Aftermarket Services Service line

  • Premium

    Spare and Replacement Parts for Oxidizers

    Having the necessary spare parts readily available is a prerequisite for minimizing the cost and inconvenience of system shutdowns. At Anguil, we have put a lot of effort into developing replacement part plans to support oxidizers built by us as well as other manufacturers. We take inventory of your oxidizer needs and recommend what spare parts ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA). from Oxidizer Aftermarket Services Service line

  • Premium

    Gravimetric Impactor Calibration Services

    Proper operation of Dekati Gravimetric Impactors can be ensured by following the maintenance and service instructions given in the user manuals of the instruments. If further verification of the instrument operation is needed, we can provide maintenance and calibration services for the Dekati® Impactors. All Dekati® Impactor calibration ...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Rotor Performance Check Services

    Rotor performance check ensures optimal operation. The heart of a Munters desiccant dehumidifier is the desiccant wheel (rotor). A Performance Check will monitor variations and irregularities in rotor performance/capacity, enabling corrective actions to be taken.

    By Munters based in Amesbury, MASSACHUSETTS (USA).

  • Premium

    On-Site Pulsar Preventative Solutions

    Periodic maintenance of Pulsar systems is essential to ensure accurate temperature measurement and avoid costly shutdowns. Our E2T Pulsar support services are designed to keep your E2T Pulsar system performing with minimal downtime for the long-term. We can schedule to have an experienced and dedicated Field Service Engineer come out to your site ...

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from On-Site Calibration and Repair Service line

  • Premium

    On-Site Blackbody Calibration Services

    LumaSense Technologies, Inc. can schedule to have an experienced and dedicated Field Service Engineer come out to your site to perform the field commissioning and inspection. This includes troubleshooting and verification of calibration of various Mikron Blackbody Sources.

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from On-Site Calibration and Repair Service line

  • Premium

    On-Site Quasar Preventative Solutions

    LumaSense Technologies, Inc. can schedule to have an experienced and dedicated Field Service Engineer come out to your site to perform field commissioning and inspection. This includes troubleshooting and field verification of calibration of your E2T Quasar Flare Monitoring Systems.

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from On-Site Calibration and Repair Service line

  • Premium

    Application Development Services

    Comprehensive system level integration of thin-film sensors. Our qualified technical team offers consulting, development, and production assistance – we employ simplified embedded front end solutions (electronic and software based), modules, and software algorithms, to support a fast design-in-process for the development of your application ...

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Premium

    Control Paraffin Services

    Paraffin is general found in the oil field operation. It creates blockage and will interfere with flow in oil pipelines. JC 9450 modifies the surface charge on the paraffin molecule which prevents it from accumulating (deposit) in the oil formation, pipeline and transfer pump. Mixing water with JC 9450 helps keep paraffin in a fluid state at lower ...

    By Jenfitch, LLC based in Walnut Creek, CALIFORNIA (USA). from Oil & Gas Service line

  • Premium

    Factory Calibration Services

    We know your LumaSense equipment plays a critical role on your process and research.  Precision is imperative so we’ve established a fully equipped, expertly staffed laboratory for performing calibrations that meet national standards on all makes (MIKRON, IMPAC, E2T, LUXTRON, SmartDGA®, INNOVA, and ANDROS) of LumaSense infrared ...

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Factory Service Service line

  • Premium

    Lufft - Calibration Service

    We offer an Instrument Calibration service for almost all models and sensors of environmental measurement equipment for detection of temperature, relative humidity, air pressure and flow. Our team of qualified technicians working in our in-house laboratory ensure that your instruments are performing as they should be and ...

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Premium

    Mass Flow Controller Calibration & Repair Services

    Sierra provides accurate calibration services for mass flow meters and controllers, insertion thermal flow meters, vortex and ultrasonic flow meters. We have a wide range of NIST-traceable primary standard assets including: closed loop gas flow calibration, piston & bell provers, water flow loop, and high-temperature wind tunnel. Fast ...

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    DEED Calibration Service

    Dekati DEED service program consists of two levels of services including continuous maintenance and service by the operator of the instrument and DEED Factory Calibration Service performed at Dekati factory. Proper operation of the DEED can be ensured, and lifetime extended by following continuous maintenance instructions given in the DEED user ...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Electrical Calibration Services

    The Electrical Test Laboratory caters for all types of general purpose electrical test equipment, 17th/18th edition electrical testers, multimeters, data loggers, chart recorders, signal generators, function generators, process controllers, indicators, oscilloscopes and scopemeters. The laboratory holds UKAS ISO/IEC 17025 accreditation for the ...

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services - Traceable and UKAS Accredited Service line

  • Premium

    Machine Diagnosis for Professional Data Analysis Services

    Machine diagnosis means testing the units for vibration. The goal is to extend the units’ run time by measuring their vibration on a regular basis. AERZEN’s alternative is to measure vibration, temperature and RPM with a mobile device, as well as using an integrated system for constant online monitoring.

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY. from Analysis and Consulting Service line

  • Premium

    Specialty Services

    Sometimes you need customized training, whether it’s a challenging, highly specialized application or just a matter of convenience and scheduling. For those situations, LumaSense offers specialty services, consulting and custom training.

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA).

  • Premium

    Mechanical Calibration Services

    Our mechanical calibration services cover a number of metrology disciplines including; Length, Force, Mass, Torque, Vibration, Pressure and Viscosity. The laboratory is housed within a temperature controlled environment to maintain thermal stability of both the reference standards and instruments under test.

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services - Traceable and UKAS Accredited Service line

  • Premium

    Service Contracts

    Ensure your instruments operate at peak performance throughout their lifetime with the professional maintenance and calibration provided by our Spectrum Service Contracts. As the designer and manufacturer, we understand your AMETEK Land device better than anyone.

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Premium

    Controling Services

    Process control is a great way of getting more out of your treatment plant. inCTRL is specialized in developing and implementing advanced process control solutions to optimize your wastewater treatment plant. Next to data quality, inCTRL focuses on sustainable and safe solutions. Our state-of-the-art control strategies always come with proper ...

    By inCTRL Solutions Inc. based in Dundas, ONTARIO (CANADA). from Consulting Services Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you