Temperature Sensors services for Monitoring and Testing

Proper operation of Dekati Gravimetric Impactors can be ensured by following the maintenance and service instructions given in the user manuals of the instruments. If further verification of the instrument operation is needed, we can provide maintenance and calibration services for the Dekati® Impactors. All Dekati® Impactor calibration ...

By Dekati Ltd. based in Kangasala, FINLAND.

iCenta Controls offer an installation service that covers our extensive range of Flow Meters, Level Sensors, Analytical Sensors, Displays, Loggers and Pressure | Temperature Sensors. All installations booked through our website or via our call centre, are carried out by our own technical engineers who have a wealth of knowledge and experience in ...

By iCenta Controls Ltd based in Salisbury, UNITED KINGDOM.

Dekati DEED service program consists of two levels of services including continuous maintenance and service by the operator of the instrument and DEED Factory Calibration Service performed at Dekati factory. Proper operation of the DEED can be ensured, and lifetime extended by following continuous maintenance instructions given in the DEED user ...

By Dekati Ltd. based in Kangasala, FINLAND.

Dekati® FPS service program consists of two levels of services including continuous maintenance and service performed by the operator of the instrument, and FPS Factory Calibration Service performed at Dekati factory. Proper operation of the FPS can be ensured by following continuous maintenance instructions given in the FPS user manual. ...

By Dekati Ltd. based in Kangasala, FINLAND.

Comprehensive system level integration of thin-film sensors. Our qualified technical team offers consulting, development, and production assistance – we employ simplified embedded front end solutions (electronic and software based), modules, and software algorithms, to support a fast design-in-process for the development of your application ...

By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

We offer an Instrument Calibration service for almost all models and sensors of environmental measurement equipment for detection of temperature, relative humidity, air pressure and flow. Our team of qualified technicians working in our in-house laboratory ensure that your instruments are performing as they should be and ...

By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

Thermometrics team of experienced engineers is dedicated to the continual improvement and development of our products. Our CAD system, combined with in-house design and testing expertise, facilitates our ability to develop new products with proven reliability quickly to meet your specific applications. Our Engineering team's capabilities, ...

By Thermometrics Corporation based in Northridge, CALIFORNIA (USA).

Key technology developments within the wireless industry have provided unparalleled cost effectiveness and flexibility for a multitude of communication applications and solutions, many which are still emerging. Wireless Options are industry experts at the forefront of designing and developing wireless solutions.

By Wireless Options Inc. based in Kanata, ONTARIO (CANADA).

We offer a full and comprehensive thermal mapping service for fridges, freezers, pharmaceutical distribution warehouses etc. with full reports, using calibrated instruments in compliance with the MHRA Guidelines. Temperature mapping study is a step in the validation of any pharmaceutical process. Before, during and after the manufacturing process, ...

By 3D Digital Design & Development Ltd based in London, UNITED KINGDOM.

BPC has created a bioremidiation water solution that allows oil storage farms to own and run their own water purification system. Automated Chemostat Treatment™ (ACT) is easy to install and integrate into the existing infrastructure and requires little training to operate. Due to the low operational costs, ROI is achieved even in low ...

By BioPetroClean, Inc. based in Ramat Hasharon, ISRAEL.

Delta Hydronics provides unique and specialized water heating and cooling solutions for the commercial Aquaculture, Aquarium, Zoo and Hydroponic industries. We specialize in providing complete engineering, equipment supply and turnkey installation as required for your custom application. Delta can provide all the products and services you need to ...

By Delta Hydronics based in Hudson, FLORIDA (USA).

The MHRA and FDA will expect that product and sample storage areas meet the required storage conditions as specified.  To confirm that temperature and humidity consistently meet these requirements, common industry practice is to perform a mapping validation.  This is very often carried out as part of the IQ and OQ for a new piece of ...

By Validair Group based in Wrotham, UNITED KINGDOM.

Tutela offer self install, plug and play, temperature mapping kits that come with a minimum of 10 temperature probes as a simple and economic solution to customers’ temperature mapping needs The temperature mapping kit is shipped to a specified address, installed to SOP instructions on site; when the temperature mapping exercise is complete, ...

By Tutela Monitoring Systems based in Fleet, UNITED KINGDOM.

Online analysis is an important process parameter. For your plant to operate safely, for the desulphurization process to function properly and for a high return value of the used materials, the composition of the biogas in the different fermenters and containers has to be analyzed accurately.

By Awite Bioenergie GmbH based in Langenbach, GERMANY.

By installing a Variable Speed Drive (VSD) and controlling the speed via a BMS/control system, a VSD can yield significant savings. If the fan/motor speed can be reduced by 10% then the resultant energy reduction for that plant will be approximately 25%.  Typically 20% speed reductions or around 50% energy cost savings are available due to ...

By NCS based in Cheshire, UNITED KINGDOM.

Our onsite NVLAP-Accredited Metrology Laboratory (Lab Code 200502-0) provides comparison temperature calibrations from -196 °C to 1450 °C [-321 °F to 2642 °F] on the International Temperature Scale of 1990 (ITS-90) for temperature sensors and instruments.

By Pyromation, Inc. based in Fort Wayne, INDIANA (USA).

Promet Environmental Group Ltd. offers many in house meteorological instrumentation services. Calibration of wind monitors, temperature sensors, solar radiation sensors and rain gauge instruments, to name a few.

By Promet Environmental Group Ltd. based in Calgary, ALBERTA (CANADA).

As with ambient monitoring, North American Weather Consultants has a long history of performing meteorological monitoring. We have been collecting meteorological data since the 1950's. Our company is comprised primarily of meteorologists who are very familiar with the subtleties of obtaining and interpreting meteorological data. This factor has ...

By North American Weather Consultants Inc. based in Sandy, UTAH (USA). from Applied Meteorological Services Service line

Typically the optical fibre cable will be placed on the outside of the production casing on a plug and perforate completion which requires a specific installation technique and oriented perforation solution to ensure the cable is preserved throughout the completion phase and beyond. The optical fibres provide an in-situ sensor array that makes it ...

By Silixa Ltd based in Elstree, UNITED KINGDOM. from Oil & Gas Service line

Well integrity can be summarised as the application of equipment and procedures to prevent the uncontrolled release of well fluids throughout the life of the well. This is achieved by including multiple well barriers into the well design, each of which must function normally to maintain the desired redundancy to ensure on-going well integrity.

By Silixa Ltd based in Elstree, UNITED KINGDOM. from Oil & Gas Service line