ProgramTherm - Model PT D150/600/12/2 -1200C OD150mm Two Zone Tube Furnace

Two Zone Tube Furnace PT D150/600/12/2 features dual heating Zones, each zone controlled separately. Heating length 24″ Long ( 12″+12″), Microprocessor-based self-tuning PID provides excellent control with no overshooting and +/- 1 °C accuracy. Max vacuum level could be reached to 10E-5 torr with molecular vacuum pump. So the Dual Zone Tube Furnace is widely used in vacuum and/or atmosphere protection sintering, including calcining inorganic compounds and/or preparing Li-Ion battery cathode powders with better uniformity in multiple gas controlled / CVD up to 1200°C.

• Tmax 1200°C
• Dual / Two Heating zone, Benchtop, Split, CVD Tube Furnace
• Fiber-insulated chamber with all sides heating wire ensure uniform temperature
• Multiple atmosphere processes in a single cycle are possible
• Max vacuum level 10E-5 torr
• Eurotherm PID Temperature Controller with programmable 32 segments
• Two heating zone ensure the tube furnace an improved temperature gradient, zones controlled separately
• Split chamber for fast and easy furnace tube access
• SS304 sealing flanges with valves and pressure meter
• CE standard

• Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting.
• Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller’s manual) or when the thermocouple is broken or malfunctions.
• Power failure protection resumes furnace operation right after the point of failure when power is reestablished.
• Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot

• Model No. : PT D150/600/12/2
• Heating zone : 2 heating zones
• Zone length:600mm /24″
• (300mm+300mm)
• Uniform temp zone:350mm
• Temperature uniformity +/- 5C
• Power supply : 12KW
• AC380-415V, 50/60Hz, 3-phase
• Working temperature : Tmax 1200°C (2192°F)
• Continuously 1100°C (2012°F)
• Temperature controller : Eurotherm PID controller
• Auto-tune function
• Programmable 32 segments
• Temperature accuracy +/- 1°C
• Heating rate : ≤25°C / min
• Thermocouple : N type, two pcs
• Furnace tube : Material: Quartz or Metal
• Size:OD150, length 1000mm
• Vacuum flanges : SS304 sealing flanges
• Multiple gas inlets and outlets
• Vacuum level : Max 10E-5 torr with molecular pump
• Chamber lining : Mitsubishi Raw Material high alumina 1500# fiber board
• Electronic components : Schneider maker air switch, AC contactor, SSR Relay etc.
• Heating element : HRE resistance coil wire
• Shipping info : Weight: 130 kgs
• W930xL880xH730mm
• Compliance : CE, ISO
• Warranty : One-year limited warranty with lifetime support