- Home
- Equipment
Refine by
Environmental Equipment & Supplies
112 equipment items found
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster ProCap I-3A Power Pac is designed for sanitary, point-level detection in food and dairy processing. Built to meet 3-A requirements, it ensures reliable performance while maintaining strict hygiene standards. A universal power supply, bright LED status light, and “Quick-Set” calibration make installation and operation simple. The unit offers DPDT relay output with ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Want more information about what rotary options to order? Get more information in the Rotary Configuration Guide and Rotary Paddle Selection Guide. The BinMaster BMRX-200 rotary level indicator is used in solids and powders to prevent overfills, dry runs, or process shutdowns. It has an onboard PCB and DPDT relays that allow users to set up two switching outputs, such as one to a covered and the ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BinMaster air pads are a cost-effective solution to many material flow problems. They are ideal for finely ground dry materials that tend to pack while in storage and then cling to the walls of the bin. Multiple air pads are installed intermittently along the bin wall and low pressure air is directed along the bin walls to ensure a continuous, even flow of material out of the bin. At just ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Diaphragm switch with heavy duty .031” thick, black neoprene diaphragm, externally mounted with DPDT contact. Does not have hazardous location ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
FD2000 - Microwave flow / no flow monitor in IP 64 enclosure, 24 VDC, certified for Class II Groups E, F, & G. Flow Detect 2000 is a flow sensor to detect dry solids flow in any processing ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
SHT-120 - Vibrating probe level sensor with 7.37” insertion length, 20 to 250V AC/DC, high temp probe assembly for maximum process temperature 480°F ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Side mount extension for thick bin walls. Side mount the BMRX rotary through thick concrete walls using a 6”, 8”, or 12” extended drive shaft. This extension includes a protective shaft guard with a sealed bearing end to support the shaft and prevent material from packing in the extension and causing false alarms. Consult with a BinMaster expert to configure the ideal rotary for ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Diaphragm switch with standard .016” thick, black neoprene diaphragm, internally mounted. The BM45 standard pressure switch alerts to high or low levels in bins containing non-hazardous, free-flowing dry ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
1-1/4” Galvanized NPT female coupler to attach guard pipes ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
6” x 1-1/4” Diameter stainless steel shaft ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BinMaster air pads are a cost-effective solution to many material flow problems. They are ideal for finely ground dry materials that tend to pack while in storage and then cling to the walls of the bin. Multiple air pads are installed intermittently along the bin wall and low pressure air is directed along the bin walls to ensure a continuous, even flow of material out of the bin. At just ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VF-92 - Vibrating fork level sensor with 316L stainless steel 5.91” tuning fork with hanging cable extension. Available in lengths up to 240 ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-21-C - Pre-configured vibrating probe level sensor, 20 to 250V AC/DC, 7.37” insertion length, process temp to 176°F (80°C), triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, LED status indicator light; CSA C/US listed for Class ll, Groups E, F, & ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
1-1/4” stainless steel NPT female coupler to attach guard pipes ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The DPM-300 large display Modbus scanner is the biggest and brightest display for the toughest manufacturing environments. It features a dual-line six-character display from its NEMA 4x, IP65 rated enclosure. Its super-luminous readout is UV resistant and sunlight readable up to 100 feet away. The two lines are user configurable to show either multiple variables or custom tags used to identify ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
With a built-in 4-20 mA output and integrated keypad, the SmartBob AO level sensor automatically transmits data to a PLC each time it takes a ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
CVR-600-HTL - Compact vibrating rod level sensor with 1” NPT and 6” insertion length, 20 to 250 VAC/DC, high temp probe assembly. for temperatures up to 300ºF (150ºC) with 2” temperature insulating lag ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Replacing BinMaster’s SHT-120, the VRX61 vibrating probe level sensor for high temperatures is designed for use in harsh processing environments up to 480°F ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Diaphragm switch with heavy duty .031” thick, black neoprene diaphragm, internally mounted. The BM45 standard pressure switch alerts to high or low levels in bins containing non-hazardous, free-flowing dry ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster ProCap II – 24" Standard OEM Capacitance Probe delivers reliable, easy-to-use level detection for bins, tanks, and silos. Featuring quick calibration, a bright LED status light, and DPDT relay outputs with selectable fail-safe, it ensures consistent performance in a variety of applications. Built with a rugged die-cast aluminum enclosure and PRO-Shield technology, it resists ...