- Home
- Companies
- Onset Computer Corporation
- Products
- Onset HOBO - Model UX120-014M - ...
Onset HOBO - Model UX120-014M -4-Channel Thermocouple Temperature Data Logger
The HOBO UX120 Thermocouple Logger is a four-channel LCD data logger for measuring and recording temperature in a broad range of monitoring applications. The logger makes it easy and convenient to record temperatures over a broad range (-260 to 1820⁰ C) and can accept up to four J, K, T, E, R, S, B, or N type probes.
In addition to accepting four thermocouple probes, the logger features an internal temperature sensor for logging ambient temperatures, further extending the range of application possibilities
- Easy-to-view LCD display confirms logger operation and battery status
- Near real-time readout of current temperatures as well as minimum, maximum, average and standard deviation statistics
- On-screen alarms notify you if temperatures exceed high or low thresholds
- Large memory capacity capable of storing 1.6 million measurements
- Start, stop, and restart pushbuttons
- User upgradeable firmware
- Optional protective case enables logger use in outdoor environments
- Compatible with HOBOware and HOBOware Pro software for logger setup, graphing and analysis
Onset also offers a single-channel thermocouple data logger, the HOBO UX100-014M.
Environment:
The UX120-014M Data Logger is for use inIndoor environments
Measurements:
The UX120-014M Data Logger supports the following measurements (sensors sold separately):
Internal 10K Thermistor (Temperature):
- Ranage: Logging: -20° to 70°C (-4° to 158°F)
- Acuracy: ±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F)
- Resolution: 0.024°C at 25°C (0.04°F at 77°F)
- Drift: <0.1°C (0.18°F) per year
Logger
Logger Operating Range:
- Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing); logger accuracy from 0° to 50°C (32° to 122°F)
- Launch/Readout: 0° to 50°C (32° to 122°F) per USB specification
- Logging Rate: 1 second to 18 hours, 12 minutes, 15 seconds
- Logging Modes: Normal, Burst or Statistics
- Memory Modes: Wrap when Full or Stop when Full
- Start Modes: Immediately, Push Button, Date & Time or Next Interval
- Stop Modes: When Memory Full, Push Button, or Date & Time
- Restart Mode: Push Button
- Time Accuracy: ±1 minute per month at 25°C (77°F)
- Battery Life: 1 year, typical with logging rate of 1 minute and sampling interval of 15 seconds or greater
- Battery Type: Two AAA 1.5V alkaline batteries, user replaceable
- Memory: 4 MB (1.6 million measurements, maximum)
- Download Type: USB 2.0 interface
- Full Memory Download Time: Approximately 1.5 minutes
- LCD: LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
- Size: 10.8 x 5.41 x 2.54 cm (4.25 x 2.13 x 1 in.)
- Weight: 30 g (1.06 oz)
- Environmental Rating: IP50
- The CE Marking identifies this product as complying with all relevant directives in the European Union (EU)
