MGB-TECH - Model PPS3 - G4 -4-Port PPS and NMEA Signal Splitter
The PPS3-G4 is a robust signal splitter capable of distributing precise PPS and NMEA signals through four output channels, each offering full galvanic isolation to prevent signal interference. Configurable for handling RS232 or RS422 per port, it integrates seamlessly with various protocols, parity, and bit settings, making it an adaptable choice for diverse applications. With data transmission speeds up to 115200 baud, it ensures dependable communication. Featuring adjustable PPS pulse inputs and toggle outputs, this device provides flexibility in signal handling. Its durable steel construction supports operations in temperatures from -20°C to +50°C, making it suitable for harsh environments. The device's LED indicators provide immediate power and communication status checks, while its compact design, including BNC and D-SUB connectors, facilitates easy installation. Powered by a wide 10-30VDC input, it is designed for minimal power consumption and reliable performance.
- 4 output ports
- Full galvanic isolation between ports
- NMEA message splitter
- Configurable Rs232 or Rs422 per port
- LED indicators
- 10-30VDC supply
- Small sturdy housing
Our standard PPS3- G4 is designed for the most demanding applications. It is configurable to handle almost every PPS source and distribute the signals to multiple pulse consumers
Full Featured splitter
This product features four output channels and is fully protected with complete galvanic isolation. It supports all communication protocols, parity configurations, and bit settings. Additionally, an NMEA splitter is fully integrated.
485
232
RS232 and RS485 support
A standard D-SUB connector is used, allowing seamless switching between RS232 and RS485 on a per-channel basis. It supports data transmission speeds of up to 115200 baud, ensuring flexible and reliable communication.
Highly configurable PPS input
Our PPS Pulse Splitter input provides extensive configuration options, including adjustable trigger voltage, input impedance, and selectable rising or falling edge detection, ensuring optimal flexibility and performance.
Clear LED indicators
LED indicators provide a clear and intuitive status check for power, PPS pulse trigger, and data communication, ensuring seamless monitoring and operation.
Toggled PPS pulse output
The toggle PPS pulse output is accessible via the D-SUB connector in RS232 mode, with the signal level alternating on each input pulse for precise synchronization.
Durable build
The housing is constructed from a strong, sturdy steel, designed to withstand operating temperatures ranging from -20°C to +50°C, ensuring reliability in demanding environments.
Communication Ports
- Support both Rs232 and RS485
- Max baud rate 115200 baud
- Supports all protocols parity and bitsettings
PPS pulse Output
- Minimal length after stretching 20ms
- Voltage level 5V
- Signal impedance 50 Ohm
- Delay from input
- Delay difference between channels
PPS pulse input
- Trigger levels 1V - 2V - 3V - 4V
- Signal impedance 50 Ohm or high impedance
- Rising or falling edge trigger
Power characteristics
- Wide input: 10-30VDC
- Max power consumption: 30 Watt
Back connections
- 4 x BNC (PPS outputs)
- 4 x 9P D-SUB female (NMEA outputs)
- 1 x BNC (PPS input)
- 1 x 9P D-SUB male (NMEA input)
- 1 x 3P male M16 (power)
Environmental
- Operational temperature: -20°C +50°C
Mechanical
- 225mm x 128mm x 44mm
- 4 x M3 mounting holes
- Weight 500 gram