A. u. K. Müller GmbH & Co. KG
A-U-K-Müller - Model 50.005.126 -Bistable, Servo-Controlled 2/2-Way Valve
2/2-way solenoid servo-controlled valve of DN 5 in bistable version, for the control of potable water. The valve is especially suitable for use in electronically controlled, battery driven sanitary fittings.
Most popular related searches
servo-controlled solenoid valve
stainless steel membrane
control valve
drinking water
solenoid lever valve
solenoid valve
noise emissions
fiber membrane
water hammer
drinking water valve
The power consumption is minimised by the use of impulse control (pwm) to increase long term performance, durability and battery life.
The flow rate of the cartridge valve has been optimized in such a way, that the nominal diameter of DN 5 fulfils the standard requirements for sanitary tap ware.
A wide range of connection options can be realised through the valve body.
There is no need to create a mounting contour, as is the case with a cartridge valve.
- Valve body PA 6/6, glass fibre reinforced Membrane insert PPSU Plunger Guide LCP Plunger Stainless steel Membrane and sealings EPDM Filter Stainless steel
- Automatic faucets
- Sanitary fittings
- Pilot system for valves with a larger nominal diameter
- Servo-controlled
- Pre-tested functional unit
- Geeignet zur thermischen wie auch chemischen Desinfektion
- Optimized water hammer characteristic by low noise emission according to EN 60730
- Low power consumption, suitable for battery operation
- Type solenoid valve
- Construction 2/2-way; single chamber straight valve; servo-controlled;
- mode of operation servo-controlled
- Fitting position any
- Media Cold and heated potable water and physically and chemically similar media
- T-Medium 5 - 70 °C
- T-Ambient 5 - 60 °C (41 - 140) °C (°F)
- DN 5,0 mm
- Pressure range 0,5 - 10,0 bar
- Flow factor Kv 9,5 l/min @ 1 bar (completely open)
- Pressure surge according to EN 60730
- according to EN 15091 (5l/min)
- Burst pressure according to EN 60730
- Durability according to ASME A112.18.1-2018
- Nominal voltage 6 V DC
- Operating voltage 4,0 - 6,9 V DC open/close
- Nominal power 1,4 W at nominal voltage
- Protection Type IP 65
- Insulation class B according to EN 60730
- Protection Class III according to EN 60730
- Valve body PA 6/6, glass fibre reinforced
- Membrane insert PPSU
- Plunger Guide LCP
- Plunger Stainless steel
- Membrane and sealings EPDM
- Filter Stainless steel