A. u. K. Müller GmbH & Co. KG
A-U-K-Müller - Model 62.005.126 -Servo-Controlled Solenoid Valve NC, DN 5, Straight Valve
2/2-way solenoid valve of nominal diameter DN 5 for use with cold and heated potable water as well as physically and chemically similar media. The valve is servo-controlled and normally closed (NC).
Most popular related searches
servo-controlled solenoid valve
solenoid lever valve
solenoid valve
water treatment installation
stainless steel membrane
drinking water
digital temperature controller
chamber valve
flow regulation
noise emissions
Valves of this design are single chamber, straight valves and can be manufactured with various connections.
This compact valve is ideally suited as a water inlet valve with a Cv value of 6.2 l/min.
Electrical operating safety is achieved by insulation class H.
By using high quality insulation materials, continuous duty (100 % ED) at higher medium temperatures is possible. The glass fibre reinforced polyamide valve body resists hot water of 90 °C.
- Electronic faucets and bidet
- Steam appliances
- Dental appliances
- Hot / cold drink dispensers
- Industrial appliances
- Air conditioning
- Agricultural implements
- Cleaning systems
- Temperature control devices
- Ice machines
- Water treatment installations
- Suitable for hot water up to 90°C
- Long term performance capability
- High operating safety through the use of high quality materials and 100% final testing of the products
- Servo-controlled
- Normally closed (NC)
- Solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4 x 90°
- Optimized water hammer characteristic by low noise emission according to EN 60730
- Type solenoid valve
- Construction single chamber straight valve
- Function NC (normally closed)
- Ways 2/2-way
- mode of operation servo-controlled
- Media Cold and heated potable water and physically and chemically similar media
- T-Medium 5 - 90 °C (194 °F max.)
- T-Ambient 5 - 70 °C (41 - 158 °F)
- DN 5,0 mm
- Pressure range 0,2 - 10 bar
- Flow factor Kv 6,0 l/min @1 bar
- Q-max 20 l/min
- Flow regulator on request
- Pressure surge according to EN 60730
- Coil type MS 39
- MS 40
- Nominal voltage 12 - 24 V DC
- other voltages on request
- Voltage tolerance +10% -15%
- Duty cycle 100%
- Nominal power 8,0 W
- Protection type IP 00 up to IP 65
- Coil connections Flat Tabs 6,3 x 0,8 mm according to EN 60529 (IP 00)
- Coil connections (MS.040) plug socket, model B-industry form
- Insulation class H according to EN 60730
- Protection class I according to EN 60730
- (for incorporation in class I)
- Plunger and spring stainless steel
- Membrane and sealings EPDM
- Filter (in inlet) Stainless steel
- Coil coating PET
- Plunger Guide PPSU
- Valve body PA 66, glass fibre reinforced