GAOTek - Model GT00Z600ZX -AC and DC Clamp Meter with Integral Test
This AC and DC clamp meter is specially designed for measuring AC/DC current and leakage current with modern CT technology and digital integration technology.
The GAOTek AC and DC Clamp Meter with Integral Test is specially designed for measuring AC/DC current and leakage current with modern CT and digital integration technology. It is a device widely used in electrical safety testing. The small clamp is suitable for locations densely populated with lines such as electric power measurement systems, high speed railway systems, car circuit overhauls, etc. It is comprised of a RS-232 interface, communication cables, and software through which historical data is available for data reading, exporting, and printing. This clamp meter complies with IEC1010-1, IEC1010-2-032, Pollution level 2, and CAT III (600 V) safety standards.
- Measurement of AC/DC current ranges from 0 mA to 60 A
- Small in size, High accuracy and flawless function
- Non-contact measurement for safe operations
- Offers data holding and data storage functions
- Four Digits LCD display
- Data stored in the memory of the meter uploaded to PC via RS-232 interface
- Automatic power off to lower the power consumption
- Test mode: Clip-on CT and Integral mode
- Size of clamp mouth is ɸ 0.28 in (7 mm)
- Clamp meter widely used in the fields of electricity, communications, meteorology, railroad, oilfield, construction, measurement and mining establishments
- IEC1010-1, IEC1010-2-032, Pollution level 2 and CAT III (600 V) safety standards
- Test Mode : Clip-on CT, Integral mode
- Standards : IEC1010-1, IEC1010-2-032, Pollution level 2,CAT III (600 V)
- Interface : RS232
- Measurement Range : 0 mA to 60 A (AC/DC)
- Test Position : Tested wire in the jaw center.
- Clamp Size : ɸ 0.28 in (7 mm)
- Resolution : 1 mA (AC/DC)
- Frequency : 45 Hz to 400 Hz (AC)
- Accuracy : ± 2 % rdg ±5 dgt 73.4 ˚F (23 ˚C), below 75 % RH
- Line Voltage : 600 V (AC)
- Working Current : 10 mA
- Power Consumption : 10 mW
- Sampling Rate : 2 times/second
- Insulating Strength : AC 2 kV/rms (between the alloy of the clamp and the housing)
- Data Memory : 99 units
- Com-Configure : Baud rate: 9600 bps, Stop bit: 1
- Range Shift : Automatically
- Display Mode : 4-digits LCD Mode
- Out of Range Indication : DH (indicates on LCD)
- Reading Hold Indication : RH (indicates on LCD)
- Polarity Indication : “ -“ sign (auto identified DC current)
- Auto Power-off : 5 minutes after power on
- Battery : Zn-Mn dry battery,6F22, 9 V
- Weight : 6.35 oz. (180 g)
- Dimension : 6.61 in × 2.56 in × 1.34 in (168 mm × 65 mm × 34 mm)
- LCD Dimension : 1.38 in × 0.85 in (35 mm × 21.5 mm)
- Display domain: 1.26 in × 0.6 in (32 mm × 15 mm)
- Operating Temperature Humidity : Below 80 %
- Storage Temperature Humidity : Below 70 %
- Operating Temperature : 14 ˚F to 122 ˚F (-10 ˚C to +50 ˚C)
- Storage Temperature : 14 ˚F to 140 ˚F (-10 ˚C to +60 ˚C)
- Limit Temperature Error : 14 ˚F to 32 ˚F (-10 ˚C to +0 ˚C)