Accepta - Model 2315 -High Performance Food Grade Silicone Antifoams
Accepta 2315 is a high performance food grade silicone antifoam scientifically formulated for the control of unwanted foaming in cooling water and other water systems. Accepta 2315 is a superior; silicone based cooling water antifoam emulsion which combines high efficiency with outstanding versatility for a wide variety of applications.
- High performance silicone based antifoam
- Food grade
- Excellent for cooling water systems
- Very versatile, can be used in a wide variety of applications
- Form:Liquid
- Colour:Off white
- Odour:Negligible
- pH:~ 7.0
- Relative density:1.0
- Solubility in water:Dispersable
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 2315 is typically applied between 5 and 100ppm in the re-circulating water.
Accepta 2315 may be diluted using either softened or demineralised water, for continuous pumped application. However, where only intermittent dosage is required it is recommended that Accepta 2315 is premixed with 4 parts water prior to addition to the system.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
Application in a cooling tower clean
When using Activ-Ox foam cleaning products drain the tower sump and fill with 2 inches of clean water and add the following cocktail of chemicals to neutraise the foam as ti drips into the sump.
- Approx 500ml/m3 of Accepta 2315 Defoamer
- Approx 500ml/m3 of Accepta Dechlor
Boiler water dosages should start from 1ppm up to a maximum of 5ppm.
For further technical assistance concerning Accepta 2315 please contact Accepta.
- Weight 25 kg
- Dimensions 30 × 23 × 47 cm
- Size 10Kg, 25kg