Accupoint - Model LP2 -Low-Pressure Moisture Transmitter
The Accupoint LP2 is a microprocessor-based low pressure (5-100 psig) moisture transmitter. Whether checking moisture in bulk gas trailers prior to filling or measuring a sample stream after the process pressure reduction, the Accupoint LP2 delivers reliable moisture measurement.
Microprocessor-based Simplicity
Utilizing our time-proven electrolytic method and MEECO`s two-wire transmitter design, the Accupoint LP2 features microprocessor-driven electronics. With the push of a button, choose any one of five different display options and a host of output scales. Follow the menu and adjust both your display and output range as measurement requirements change.
A built-in, dual-stage pressure regulator and an operating pressure range of 5-100 psig make the Accupoint LP2 ideally suited for water vapor determination in most low pressure industrial, natural gas, and process gas streams. It functions as a standard 24 VDC, two-wire loop powered transmitter. An optional RS-232 output signal is available when the unit operates in three-wire mode. Housed in a NEMA4X enclosure, the Accupoint LP2 mounts directly at the measurement point, whether indoors or out.
- Units of Measure: Microprocessor-based electronics allow a choice of display options including ppmV, ppmW, Ibs/mmscf, or °C and °F dewpoint.
- I Three-Button User Interface: Mode/Enter key, along with simple Up and Down keys, make using the menu quick and simple.
- I LCD Display: Integral digital display allows direct indication at point-of-use, and quick field configuration of the control parameters.
- I Selectable Output: Flexibility to change output scales in the field. No need to replace electronic components. Simply access the menu via the Mode/Enter key and select the output scale.
- I 2-Wire or 3-Wire Modes: Standard simplicity of a 2-wire, loop-powered transmitter (with FM/CSA approval for Class 1 Division 1 with intrinsic safety barrier) or the added feature of RS 232 output (in a 3-wire mode without FM/CSA approval).
- I On-Line Verification: Use the simple Delta-Flow procedure to quickly verify sensor linearity and performance in situ.