- Home
- Companies
- Geopolymer Solutions, LLC
- Products
- Geopolymer - Model ST200 - Acid and ...
Geopolymer - Model ST200 -Acid and Mold Resistant Stucco
ST200 Stucco is an acid and mold-resistant solution for commercial and residential facades, offering quick curing, easy application, and superior durability.
ST200 is a sustainable, environmentally friendly stucco material with all the benefits of ultra high performance Cold Fusion Concrete.
- Acid Resistance: Resistant to various acids with minimal mass loss.
- No Base Coats Required: Apply in a single layer without base or intermediate coats.
- Mold and Bacterial Resistance: Prevents the growth of mold and bacteria.
- Bonds to Various Surfaces: Bonds to wood, concrete, masonry, and other materials (except plastic and galvanizing).
ST200 Stucco is engineered for applications requiring a quick-curing, acid-resistant, and durable finish. Its versatility makes it ideal for a wide range of facade projects in both commercial and residential settings.
- Suitable for commercial and residential applications.
- Ideal for use over wood, masonry, and cementitious surfaces.
- Perfect for projects in warm climates, where rapid curing times are essential for meeting deadlines.
ST200 Cold Fusion Concrete is tested for acid resistance in various acids to ensure protection against chloride, sulfate, hydrocarbon, and solvent degradation.
- ASTM C1157 Compliance
- Acid Resistance Testing
- Chloride, Sulfate, and Hydrocarbon Resistance Testing
- Compressive Strength Testing
Packing, Shelf Life, and Coverage
- Supplied in 55-pound bags or super sacks
- 2-year shelf life
- One bag covers 13.2 square feet at ½ inch depth
Directions for Use
Prep: For wood, remove dirt, debris, and incompatible coatings, ensuring the surface is dry. For concrete/masonry, clean the surface, remove debris and coatings, and keep it moist.
How To Apply: Mix 1.78 gallons of water per 55-lb bag for 2 to 4 minutes using a paddle mixer. Apply stucco with a hawk and trowel to the desired thickness, smoothing or texturing within 30 minutes. For spray applications, use rotor-stator, piston, or squeeze pumps, mixing the same ratio and applying to the desired thickness, smoothing or texturing within 30 minutes. Seal with Fusion Bond sealant or water-resistant paint after 4 days in warm weather (75°F+) or 7 days in cooler weather.
Cleanup: Clean all equipment immediately with water to prevent curing in the applicator.