Epochemmie - Model EP-H2S Series -Activated Carbon
EP-H2S(series): Coal based pellet non-impregnated Activated carbon, Specially designed and especially for H2S adsorption.EP-H2S(series) is coal based and produced by the special manufacturing technology. It gives this type carbon extraordinary high H2S breakthrough capacity. This type is not impregnated activated carbon with higher ignition temperature (>450cC ). It`s cue kind of microporous carbon with large surface area and well developed pore structure Ton - impregnated means all of pore volume and surface area can be used to absorb Sulfiu element during the process of catalytic and oxidative toH2S.Therefore it`s more safe and avoids sencas problem for alkali-impregnated carbons during handling, transportation and vaste inatcrial disposal.
- Extraordinary high H2S adsorption.
- Longer bed life with fewer service interruptions and lower O&M costs.
- Low-pressure drop and no dangerous pH problems during whcls usmg process
Used in any application area: vvhere impregnated or other odor control carbons are currently used in Odor control, Sewage treatment plants, Refineries and pulp/paper mills, Acidic gases such as HCL and S02 and Volatile Organic Compounds (VOC).
Wet activated carbon depletes oxygen from air and, therefore, dangerously low levels of oxygen maybe encountered. Whenever workers enter a vessel containing activated carbon, the vessel`s oxygen content should be determined and work procedures for potentially low oxygen areas should be followed.Appropriate protective equipment should be worn.Avoid inhalation of excessive carbon dust.No problems are known to be associated in handling this material.However, dust may contain greater than 1.0% silica (quartz).Long-term inhalation of high dust concentrations can lead to respiratory impairment.Use forced ventilation or a dust mask when necessary for protection against airborne dust exposure