FUHR GmbH
acuraMultiflow - Depth Filter Cartridges
FromFUHR GmbH
acuraMultiflow depth filter cartridges are produced in the Melt-Blown procedures. The four layered construction occurs through use of different hose nozzles. Besides, the Polypropylene fibres and with it also the pore structure become finer and finer from the outside inwards. This multi layered construction allows the storage differently to big dirty particle in up to four situations. This permits a high flow and an extremely long state time with low difference pressure.
Most popular related searches
depth filter cartridge
depth filter
filter cartridge
cartridge filter
reverse osmosis water filtration
water filtration system
water filtration
process fluid
chemical filtration
reverse osmosis water
- Multilayer Structure - Depth filter cartridges with multilayer structure cartridge with fine fibers in inner layer and coarse fiber in outer layer in order to filtrate diameter of dust in different layer.
- High Flow Rates - associated with a longer service life and lower pressure drop.
- Long Service Life - The depth filter structure, low pressure drop and resistance to high differential pressure give precise filtration performance with a long filter life.
- Broad Chemical Compatibility - 100% Polypropylene for compatibility with a wide range of process fluids.
- Fda Compliant - Certificated by NSF 42 and FDA CFR Title 21.
- Extensive Program - 9 different micron ratings from 0,5 to 100 µm, different cartridge length up to 40" and all standard endcaps and adaptorconfigurations will ensure an optimal filtration process.
- Material: thermally bonded Polypropylene
- Structure: 4-layer depth filter
- O-Ring-material: Silicone, Fluorcarbon, EPR, Nitrile and FEP
- Maximum operating temperature: 60°C
- Maximum differential pressure drop: 3,2 bar at 20°C, 1,8 bar at 60°C, - recommended replaceable differential pressure drop 1,5 bar
- Inner diameter: 28 mm
- Outer diameter: 63 mm
- Nominal micron ratings (80%): 0,5, 1, 3, 5, 10, 25, 50, 75 and 100 µm
- Available cartridge length: 9 3/4", 10", 19 1/2", 20", 29 1/4", 30", 39" and 40"
- Resin and paint coatings
- Magnetic tape and disk media
- Photographic emulsions
- Electroplating, etching and image development
- Processes in PCB industry
- Filtration of water for manufacturing processes
- Ink
- Solvents and chemicals
- Filtration of electroplating fluid in conventional electroplating industry
- Pre-flter of Dl `& RO water filtration systems for industry and pharmaceuticals
- Food & beverages
- Cosmetics