Adamant Valves - Model AV-8 - AV-8 Sanitary Constant Pressure Valves

Application AV-8 series constant pressure valve can ensure a stable pressure at both outlet and inlet. It is widely used in separators, heat exchangers, tank systems and other equipments. It also can be used as a relief valve. Materials Materials: AISI-304 Size: 1''-2'' Seals: PTFE Working Principle Constant pressure valve is remotely operated by compressed air. The operation does not need any sensors; it only requires an air pressure regulator and a pressure gauge on pipeline for monitoring. A unique plunger design can make a rapid response to any pressure changes during the medium flow and changes stem position relatively to maintain the pre-set pressure. When the pressure increases, the valve opens; when the pressure decrease, the valve closes.

Most popular related searches
- sanitary valve pressure regulator relief valve compressed air air regulation pipeline monitoring water damage valve operator PTFE valve air sensor

General Introduction

Design Standard

AV-8 series constant pressure valve complies with DIN, 3A and ISO standards.
The valve includes a valve body with seat, valve bonnet, a stem with a diaphragm and a clamp.
Constant pressure regulating valve's inlet is 90° angle to the valve bottom, so as to minimize residue and facilitate cleaning. The plunger design allows less liquid flow and higher CIP flow.

Technical Specification

Nominal Pressure:
Max. product pressure: 87psi (6bar)
Temperature:
Max. sterilization temperature: 130°C, dry steam: 121°C (2bar).
Steam must be dry, because condensed water will damage the diaphragm. The diaphragm should be replaced after 100 times samplings or sterilizations.

Specifications

Technical Parameters
Metal material	Product wetted parts		AISI 316L	Comes with material certificate
	Other steel parts		AISI 304
Diaphragm material	Upper diaphragm		NBR	All material comply with FDA21CFR117.2600
	Lower diaphragm		PTFE / EPDM
Pressure	Air pressure		0 ~ 120psi (0 ~ 8bar)
Flow rate	Approximately 7m³/h
End connection	Welded	Welded ends: DIN11850, DIN11851/ SMS/ 3A/ ISO etc.

Sanitary constant pressure valve can ensure a stab...

Sanitary constant pressure valve can ensure a stable pressure at both outlet and inlet. Adamant Valves AV-8 series constant pressure valve is widely used in separators, heat exchangers, tank systems and other equipments. It also can be used as a relief valve.

Customer reviews

No reviews were found for Adamant Valves - Model AV-8 - AV-8 Sanitary Constant Pressure Valves. Be the first to review!

Contact supplier

Loading... Drop file here or browse Great, file uploaded. Change File Drop file here or browse

Yes, please send to similar suppliers.