Advanced Energy - Model IMPAC 8 Pro Series - Portable, Digital Pyrometers for Non-Contact Temperature Measurement, 250 to 2500°C
From Temperature Measurement Products - Pyrometers - Glass Applications
Advanced Energy’s battery-driven Impac series 8 pro pyrometers offer wide temperature ranges and high accuracy. The series features Impac IS 8 pro, IGA 8 pro, and IS-8GS pro. Fully digital signal processing. Integrated graphic display. Bright, optimized viewfinder with exact spot indication. Aluminum die-cast housing for harsh condition. Short response times and quick detection of temperature differences.
Overview
The Impac series 8 pro pyrometers are high-quality, battery-driven portables for non-contact temperature measurement. Thanks to full digital processing, they offer wide temperature ranges and high accuracy and measuring results can be shown and analyzed directly on site.
For high temperatures, the Impac IS 8 pro is available in two temperature ranges between 600 and 2500°C. For medium temperatures, the Impac IGA 8 pro offers a range from 250 to 1600°C. The Impac IS 8-GS pro is a special version for use in foundries.
Benefits
- Use daily in rough industrial conditions
- Easily adjust to small spot sizes
- Enable short response times (1 ms) for exact measurement of fast-moving objects
- Store large amounts of measuring data for subsequent analysis
Features
- Very robust aluminum die-cast housing for use in harsh environments
- Focusable precision optics for adjusting to the smallest spot sizes
- Temperature display on the housing, in the viewfinder and on the multifunctional display
- Integrated maximum value storage to determine the peak value achieved during a measuring series
- USB interface for using the optional analyzing software PortaWin
Technical Specifications
Temperature Ranges
- IS 8 pro:
- 600 to 1800X (MB18)
- 750 to 2500°C (MB 25)
- IS 8-GS pro: 1000 to 200(TC (MB20)
- IGA 8 pro:
- 250 to 1600X (MB16)
- 280 to 2000°C (MB 20)
Measurement
Measurement
- Spectral Ranges:
- IS 8 pro: 0.78 to 1.1 um
- IS 8-GS pro: 0.55 um
- IGA 8 pro: 1.45 to 1.8 um
- Measurement Uncertainty: 0.4% of reading +1°C; s = 1-Tamb. = 23°C
- Repeatability: 0.1% of reading or 0.8*C; The larger value is valid; s = 1, Tamb. = 23°C
- Exposure Time t90: 1 ms (IS 8-GS pro: 0.5 s)
- Emissivity E: Adjustable from 10 to 100% in 0.1% steps
Optical:
Optical:
- Sighting: Optimized through-lens viewfinder with dioptry correction -2.5 to +3 dpt, indication circle for measuring spot
- Optics:
- Achromatic, adjustable from a = 500 mm to °° (with close-up lens: a = 250 mm to 500 mm)
- Effective Lens Aperture Diameter D: 20 mm (distance °°) to 25 mm (distance 500 mm)
- View Magnification: 3x, angle of view: 10°
- Distance Ratio (FOV): IS 8 pro: Minimum 500:1 (1 mm)
- IS 8-GS pro: 180:1 (2.8 mm)
- IGA 8 pro: Minimum 310:1 (16 mm)
Interface and Communication:
Interface and Communication:
- Display: See data sheet
- Serial Interface: USB 2.0 (supplies the instrument when connected, but without battery charging function)
- Parameters: Emissivity, direct emissivity setting; storage interval, temperature indication in °C or °F
Environmental
Environmental
- Protection Class: IP52 (housing, exclude handle with battery case), IP40 (handle)
- Ambient Temperature: 0to50°C(32to122°F)
- Storage Temperature: -10to65°C(32to149°F)
- Relative Humidity: Non-condensing conditions
- Weight: 1.2 kg (2.65 lb) with batteries
- LxWxH: 210 x 75 x 175 mm (8.27 x 2.95 x 6.89 in)
- Housing: Aluminum (housing), polyamide (handle)
- CE label: According to EU directives about electromagnetical immunity
Electrical
Electrical
- Power Supply: 6 x 1.5 V alkali-manganese IEC LR6 or6x 1.2 V rechargeable batteries
- Uninterrupted operation time approximately 35 hours with alkali-manganese batte
Typical Applications
Typical Applications
- Steel and metal making: Coke oven, stove dome, blast furnace, and pouring stream
- Steel and metal forming: Hot rolling/rolling mills, hot forming, casting and forging, continuous casting
- Glass applications: Glass melting furnace, glass foreherth and feeder, and glass mold temperature measurement
Applications
-
Temperature and gas sensing solutions products for industrial markets - Manufacturing, Other
Keep costs down and product quality high with proven temperature and gas sensing solutions. Advanced Energy knows how to build products for custom applications used in industrial markets. Thanks to decades of experience, our proven temperature and gas sensing products easily meet stringent design requirements. Products with demanding production processes (e.g. polyethylene plastic and asphalt) require temperature management and accuracy throughout their production cycles. Our products can help you ensure ...
Downloads related to this product
Customer reviews
No reviews were found for Advanced Energy - Model IMPAC 8 Pro Series - Portable, Digital Pyrometers for Non-Contact Temperature Measurement, 250 to 2500°C. Be the first to review!