- Home
- Companies
- Advanced Energy Industries, Inc.
- Products
- Advanced Energy - Model Mikron M315-HT ...
Advanced Energy - Model Mikron M315-HT -Portable, Two-Piece Low Temperature Blackbody Calibration Source
Portable, Two-Piece Low Temperature Blackbody Calibration Source with a Large Surface Area, Ambient +5 to 450°C. Advanced Energy`s Mikron Calibration Source M315-HT series are infrared radiators used for calibrating and verifying the output signals of pyrometers, thermal imaging systems, heat flux measurement systems, or spectrographic analysis systems. Temperature range: Ambient +5 to 450°C (+9 to 842°F). Manufactured and tested to meet rigid quality control standards. Excellent general purpose calibration.
The Mikron® Calibration Source M315-HT is a two-piece portable blackbody calibration source with a digital indicating temperature controller that can be set at any temperature between ambient 5 to 450°C (9 to 842°F). Once set, the source temperature is controlled to within ±0.3°C by an internal RTD sensor. The unit has an emissivity of 1.00 at 8 to 14 µm.
The M315-HT calibration source and the digital indicating temperature controller are contained in separate housings to allow greater flexibility in positioning the instrument within an installation (e.g. long path calibration).
- Ensure fast heat-up times and high temperature stability
- Experience greater flexibility in positioning the instrument within an installation
- Achieve high accuracy and repeatability
- Guarantee the quality of your calibration source
- Operate with high precision and resolution
- High effective emissivity 1.00 at 8 to 14 µm
- Large aperture (3 in diameter)
- Excellent stability ±0.3°C per 8-hour period
- Furnished with certificate of calibration traceable to NIST
- RS232 serial communication included
Measurement Specifications
- Temperature Range: Ambient +5 to 450°C (+9 to 842°F)
- Temperature Uncertainty: 0.25% of reading ±1°C
- Accuracy calibration performed radio metrically, the uncertainty of emissivity and transfer standard are already included
- Temperature Resolution: 0.1 °C
- Stability: 0.3°C per 8-hour period Provided stable AC mains voltage and minimum air flow across the exit port or emitter plate
- Source Non-Uniformity: Approximate ±1°C at 250°C, ±2°C at 400°C
- Heated Emitter Shape: Flat Plate
- Exit Port Diameter: 76 mm (3.00 in)
- Emissivity: 1.00 effective emissivity at 8 to 14 pm
- Standard Calibration Method: Radiometric at 8 to 14 pm
- Temperature Sensor: Precision platinum RTD
- Warm-Up Time: < 30 minutes from ambient to 400°C
- Slew Rate tore Stability: Approximately 6 minutes for +50°C change
- Slew Rate to 0.1 °C Stability: Approximately 6 minutes for +50°C change
Communication / Interface
- Remote Set Point: Via RS232
- Method of Control: Digital PID controller
Environmental Specifications:
- Operating Ambient Temperature: 0to44°C(30to110°F)
- Cooling: Fan cooled, air inlet on rear pane
- Operating Humidity: 90% RH max, non-condensing
- HxWxD: Blackbody Source: 207.3 x 280.4 x 266 mm (8.2 x 11 x 10.5 in)
- Controller: 207.3 x 280.4 x 266 mm (8.2 x 11 x 10.5 in)
- Weight: Blackbody: 4.9 kg (10.8 lb)
- Controller: 3.2 kg (7 lb)
- CE Certified: Yes
Electrical
- Power Requirements: 115 VAC ±10% 50 and 60 Hz 600 W max (230 V optional)