AGICO - Model GCBC -Screw Briquetting Machine

Screw press briquetting machine can produce biomass briquettes with higher compaction. After feeding, the material is conveyed to the briquette forming head by a revolving screw shaft driven by electrical motor or biodiesel motor. The screw shaft is the main part of screw press briquetting machine. The screw distance becomes smaller and smaller along the screw shaft to briquette forming head. With the decreasing screw distance, the material endures bigger and bigger pressure. At end, different shapes of biomass briquettes form out under huge pressure from revolving screw shaft. Because of the shaft, there is a hole left in the center of biomass briquette column.

Compared to solid, the hollow in the center of biomass briquettes makes for burning. The speed of screw briquetting machine is so quick (20 seconds can create a 60 cm long fuel wood briquettes), and the screw pressure is bigger than jam pressure, so the biomass briquettes have high a density which is easy for transport and storage. With these good features, screw briquetting machine is more popular in the production.

Charcoal processing generally requires the use of screw press briquetting machine, charcoal furnaces and other equipment. If the size and humidity of the raw materials are not suitable, the crusher and dryer are also needed.

• Firstly, crushing raw materials to less than 10mm with a hammer mill. Use a dryer to treat raw materials with a moisture content of less than 12%.
• Secondly, the raw materials are put into the briquetting machine, and then made into wood briquettes by the action of high temperature and high pressure of the briquetting machine.
• Finally, the wood briquettes were put into the carbonization furnace for carbonization, and the BBQ carbon rod was finally obtained.

What Kind Of Raw Materials Are Suitable For Screw Briquetting Machine Processing?

These materials are crushed (diameter below 6mm, such as rice husk, sawdust without crushing) through the mechanical extrusion of the four edges, hexagonal or square hole forming fuel.The natural packing density of the raw material before the molding of the fuel briquettes is 60-350kg/m3, and the density after molding is 1100-1400kg/m3. It can be seen that the density of the fuel briquettes after extrusion has increased several times to ten times than before.

Therefore, the density of the uniform fuel briquettes which made by the screw briquetting machine can greatly limit the release speed of plant volatile combustion, can alleviate because straw burning wood and air supply, extend combustion time, and can improve the efficiency of 30%-40%.

After years` experiment, we develop this kind of screw briquetting machine with capacity from 180kg per hour to 350kg per hour. We have five models screw briquetting machine for you to choose, different output capacity, different briquettes size, different machine weight, you can choose what you need.If you have anything doesn’t understand, welcome to contact us, we will provide the most suitable solution for you.