Kimax 1, the axle load gauge for economical and convenient supervision of axle loads on vehicles, trailers and semitrailers equipped with a pneumatic suspension system.
Kimax 1 calculates the current axle load from the current air pressure in the suspension system and displays this figure as a three-digit value.
The pressure sensors are located in the display making a compact unit to avoid external influences on the electronic components and sensors.
… and warns when limits are exceeded
Kimax 1 has two separately adjustable alarm values. Exceeding alarm level 1 is indicated by a flashing display. Exceeding alarm level 2 switches in an internal relay. The relay signal can be used as ON/OFF input for another unit, for example an on-board computer or an external lamp.
Kimax 1 helps to achieve economical transportation, avoid fines and simultaneously optimizes the cargo weight.
Air circuits
On vehicles with two independent pneumatic suspension circuits per axle or axle group, the air pressure is measured for each pneumatic circuit with the 2-sensor version and Kimax 1 calculates the current load from these two values.
On vehicles with one common pneumatic suspension circuit, the axle load meter measure this air pressure and calculate the actual load from this pressure.
The 2 air input meter displays the accurate change in load more rapidly compared to a display with only one air input.
More options:
In case you need multiple axle air suspended on-board weighing, the Kimax 2 system might be a good option for you.