SpillStop Ultra - Model 815-UHP & 815-UHP/H -Alarm Controller with Hose Protection

• Provides automated control for hydraulic or PTO driven pumps 
• Prevents spills and damage due to blown hoses 
• Defaults to shut down condition if malfunctioning
• Weather resistant enclosure 
• Operates on truck power 

Under normal loading conditions, the SpillStop is wired an external warning horn and the loading pump.  When the tank is being filled, the SpillStop will activate the warning horn and first level shut down at the alarm 2 set point pre-programmed in the 808P2.  The alarm 2 set point is used to alert the operator that the tank is nearing full.  Once Alarm 2 is activated, the horn alarm will sound AND the pump will shut off.  At this point, the operator can press the bypass button on the SpillStop to silence the horn and regain the pump to clear the hose.  However, if the operator continues to load to alarm 1 (High level shutdown)also pre-programmed in the 808P2, the pump will shut off and will not power up again until the tank level drops below the alarm 1 set point.  Alarm 1 is used as a high level emergency shutdown and cannot be bypassed.  As an added feature, the SpillStop can be wired to a pressure switch on the load line.  If pressure on the load line spikes due to a valve being closed, the SpillStop will immediately shutdown the pump preventing hose blow-out.