Alderon VersAlarm - 2-Zone Indoor Rated Alarm Panel

The alarm panel is equipped with audible and visual alarm indication for two zones with separate sensors connected to the terminal block. A variety of sensors can be used such as a float switch, pressure switch, or any "dry" type sensor that "closes" during an alarm condition (normally open or normally closed). Installing a 9VDC battery (not included) provides battery backup during power outages. Use the auxiliary contacts to connect to building automation systems (BAS) and phone dialers. Multiple sensors (signaling device) can be connected for expanded monitoring.

An alarm condition occurs when the sensor (signaling device) contacts for zone-1 and/or zone-2 are activated, during which the red alarm LED(s) will illuminate (solid), buzzer will annunciate (solid), and the auxiliary contacts will activate. The alarm condition for the zone(s) activated will stay on until the sensor(s) are deactivated. If the alarm silence pushbutton is pressed during an alarm condition, it will silence the buzzer while the alarm LED(s) remain on. The silence condition(s) will reset when the sensor(s) deactivate and the alarm panel will auto reset for the next alarm cycle.

NOTE: If zone-1 is in an alarm condition and the buzzer is silenced, and then zone-2 goes into an alarm condition, the buzzer will reactivate until the alarm silence pushbutton is pressed to acknowledge that a new alarm condition has occurred.

• Primary Power: 120VAC, 50/60 Hz
• Circuit Board Primary Power: 11.1VDC, 500mA maximum
• Circuit Board Secondary Power: 9VDC, standard 9VDC battery (battery backup; not included)
• Watts: 1.4 Watts
• Field Connection Sensor: 9-10VDC, 200mA maximum (signaling device) | Terminals COM and CH1 = Zone-1 Sensor (Alarm 1) and Terminals COM and CH2 = Zone-2 Sensor (Alarm 2)
• Auxiliary Contacts: 24VDC, 500mA maximum (each); Normally Open | Terminals COM and 1A = Zone-1 (Alarm 1) and Terminals COM and 2A = Zone-2 (Alarm 2)
• Auxiliary Alarm Power: 8-10.2VDC, 150mA maximum
• LEDs: Green (power) and Red (alarm)
• Buzzer: 85 dB @ 10-feet
• Wall-Mounted Power Supply: 120VAC, 50/60 Hz (input); 11.1VDC, 500mA maximum (output); (6-foot cord)
• Enclosure: Thermoplastic; 5 x 4 x 1.3 (inches); Type 1, Indoor; Removable Cover
• Certifications: CSA (US and Canada)
• Three-Year Limited Warranty: We guarantee our products operate correctly and offer a 3-year warranty on all standard catalog products.