AMISCO - Model 10 mm -Pilot Valves

The 10mm solenoid valve is designed for those applications, where high performances in terms of pressure and flow are specified, together with very low power consumption and miniaturized dimension. High reliability even at high cycling rates is granted in any case. This system is designed for use with air. The solenoid valve is composed by an encapsulated coil joined to a plastic valve body made by PBT. The assembly is not detachable.

heat resistant bobbin moulded with 30% glass filled polyetylene terephtalate (PET)

• class H 180°C copper wire according to IEC 60317-51
• encapsulation with high quality specially designed glass filled polypropylene homopolymer
• plunger and core made by a magnetic stainless steel specially designed for solenoid applications.

The pilot assembly is designed for more than 50 million cycles. The valve is normally equipped with HNBR seals and monostable manual override. The coil is designed and manufactured according to EN 60204.1 and VDE 0580 and it’s suitable for industrial ambient conditions.

The pilot is designed only for low voltage DC applications. All the components used are UL-listed. The coil is also in conformity with 94/9/EC ATEX for electrical apparatus of group II, category 3. All the pneumatic connections are located in the valve body and the Amisco 10 mm pilot valve is suitable for the use of subbases or the assembling in batteries, for common pressure and exhaust location. More technical specifications are reported in the following pages. 10 mm Pilot Valve 1.