Amrep, Inc.
Amrep - Model AMPTR-35 -Pup Trailer
FromAmrep, Inc.
Amrep’s trailers are designed to meet your short haul multiple bin pickup & delivery needs. Amrep’s trailers will reduce your fleet size by maximizing efficiency. Amrep’s pup trailers are designed with the ability to pick up and dump containers on both the roll-off unit and trailer without the need to disconnect the trailer. Purchased in conjunction with an Amrep roll-off unit, all Amrep dumping trailers can be fully operated from the Amrep standard cab control console.
Most popular related searches
fire extinguishing
fire extinguisher
control valve
fire protection
hydraulic control valve
coverall
valve operator
hydraulic valve
Type
- Reeving unit, full tilt frame roll-off chassis
Rated Capacity
- 120,000# cylinder capacity, 60,000# hoist
Container Capacity
- Up to 24” (larger available)
Rail Size
- Rectangular tubing 12” x 4” x 3/8” length – approximately 26’
Rail Width
- Standard spacing is 34”
Frame
- 3/8 T-1 x 11` channel
Tilt Angle
- 46 degrees (approximate)
Axles / Hubs
- 20,000 lb rating hub piloted
Suspension
- Hutch 9700 - 3 spring suspension
Tongue
- 14` length, 8 x 8 x 1/2" square tube, integral with chassis
Estimated Body Weight
- 12,000 lbs
Hoist Cylinder Mounts
- Lower shaft – 3-½”
- Upper shaft – 2-½”
Hoist Cylinders
- (2) Single stage, double acting
- Length – 77-½”/ diameter – 6” O.D.
- Bore – 5-½” / stroke – 62-5/8”
- Rod – 3” chrome
- Material – D.O.M. tubing
Reeving Cylinders
- Single stage, double acting
- Length – 97-½” / diameter – 6-½”
- Bore – 6” / stroke – 83-5/8”
- Rod – 3” chrome
- Material – D.O.M. tubing
Rear Bumper
- Rear bumper with tail, stop, back up lights and mud flaps
Hinge Pin
- 2”
Fenders
- Full composite - minimizer
Cable Pulley
- 9” diameter with bronze bushings
Rollers
- (3) on each rail, 4 1/2” diameter with zerk fittings
Cable
- Standard 7/8" x 75` with pear ring end
Tool Box
- Steel lockable 36" curbside
Controls
- Air / hydraulic twin-stick
Control Valve
- Commercial A-35
Operating Pressure
- 1,800 psi
Paint
- Glossy black
Fenders
- 1/4 steel (painted)
- 1/4 stainless (polished)
- Full steel (painted)
- Full aluminum (polished)
Tool Box
- Aluminum t-handle
- Tarp/carry basket attatached to tool box
Tie Downs
- Rachet, hook for tie down at rear
- DOT chains
Rail Options
- Additional rollers
- Angle between rollers
- Channel rails
Fire Protection
- 20 lb fire extinguisher mounted externally
Lighting
- LED lighting package
Tapping System
- Pioneer Coverall RP4500SARG