DGH - Model D1000 Series -Analog Data Acquisition Modules
The D1000 series data acquisition modules provide an isolated 15-bit measurement and discrete digital I/O bits for controlling solid state relays or sensing contact closures. The D1000 ADC performs an analog to digital conversion and linearization of sensor input data and communicates in ASCII format via RS232 or RS485. The module`s ADC continuously converts data at the rate of 8 conversions per second and stores the latest result in the buffer. The D1000 series ADC modules can also be mounted on a DIN-Rail using the MK-1 mounting kit.
- Voltage: +/-10mv, +/-100mV, +/-1V, +/-5V, +/-10V, +/-100V
- Current: +/-1mA, +/-10mA, 4-20mA, +/-100mA, +/-1Amp
- Thermocouple: J, K, T, E, R, S, B, C
- RTD: .00385, .00388, .00392
- Thermistor: 2252 Ohm, Honeywell TD Series
- Bridge: +/-30mV, +/-100mV, 1-6V
- Frequency: 100uS-30Sec, 1-20KHZ
- Accumulator: 100uS-30Seconds, 1Hz-10KHZ
• Process monitoring and control
• Remote data logging to any host computer
• Product testing
• Complete sensor to RS-485 or RS-232C interface.
• ASCII format command/response protocol.
• 500V rms analog input isolation.
• 15 bit measurement resolution.
• Continuous self-calibration; no adjustments of any kind.
• Programmable digital filter.
• Digital limit setting and alarm capability.
• Digital inputs and outputs connect to solid state relays.
• Events counter to 10 million.
• Requires +10V to +30Vdc unregulated supply.
• Transient suppression on RS-485 communications lines.
• Screw terminal plug connectors supplied.