APG - Model Series MPX-E Chemical -Chemically Resistant Magnetostrictive Float Level Transmitter
The MPX Series Magnetostrictive Level sensor provides highly accurate and repeatable level readings in a wide variety of liquid level measurement applications. With a chemical resistant coating and a Kynar float, the MPX-E Chemical Magnetostrictive Level Transmitter delivers precision measurements in places where stainless steel doesn't measure up. The chemical resistant coating allows for use in corrosive, acidic, and marine environments.With a chemical resistant coating and a Kynar float, the MPX-E Chemical Magnetostrictive Level Transmitter delivers precision measurements in places where stainless steel doesn`t measure up.
- Range: Up to 96 in.,Up to 12.75 ft
- Mount: 2" NPT
- Output: Tank Cloud Slave,4-20 mA, Modbus RTU
- Certification: Class 1, Div 1,Class 1, Div 2
Durable
The coating on the MPX-E Chemical is designed for use in corrosive, acidic, and marine environments. It can withstand sulfuric acid, boric acid, hydrochloric acid, and sodium hydroxide.
Modbus Output
The RS-485 Modbus RTU output makes the MPX compatible with any Modbus controller or PLC. It also simplifies wiring dramatically.
Tank Cloud Compatible
The MPX liquid level sensor is a Tank Cloud slave sensor, able to communicate via the Internet with the addition of an LOE Master sensor or an RST-5003 module.
- Class 1 Division 1 Groups C & D, Class 1 Zone 1, Class 1 Zone 2
- Highly accurate and repeatable readings
- 4-20 mA, RS-485 (Modbus RTU) output
- Rugged and reliable, lengths up to 12.75 feet (3.9 m)
- Tank volume/level, strapping table
Performance
- Accuracy
- Greater of ±0.04 in. (±1mm) or 0.05% of full range
- Resolution
- Modbus: ±0.04 in. (±1mm)
- 4-20 mA: 14 bit DAC
Programming
- Programming
- Optional RST-6001 USB to RS-485 converter
- 4-20 mA
- Factory set or optional RST-4100 programming module
Electrical
- Supply Voltage
- 12-24 VDC
- Maximum Current Draw
- Modbus: 28 mA
- 4-20 mA Single: 22 mA
Physical
- Housing
- Cast aluminum, epoxy coated
- Stem
- 0.5” ø 316L SS with chemical resistant coating
- Stem Length
- 1 - 12.75 ft. (0.3 - 3.9 m)
Approvals
- Certifications
- Class I Division 2 Groups C & D T4 (Ta 85°C)
- Class I, Zone 2; AEx nA IIB T4
- Ex nA IIB T4
Connectivity
- Outputs
- 4-20 mA (Loop-powered 2 wire)
- Modbus RTU (RS-485) with optional Temperature Output
- Internet Connectivity
- with Tank Cloud LOE or RST-5003 Master
Environmental
- Opperating Temperature
- -40° to 185° F (-40° to 85° C)
- Maximum Opperating Pressure
- 30 PSIA 70° F (21° C)
- Protection Rating
- NEMA 4X
- IP65