- Home
- Equipment
Refine by
Environmental Equipment & Supplies
16 equipment items found
Manufactured by:Wm. W. Meyer & Sons, Inc. based inLibertyville, ILLINOIS (USA)
Ideal for pollution control across many industries. The UDV Universal Duty Valve is designed for economical and reliable material metering and airlock ...
Manufactured by:Wm. W. Meyer & Sons, Inc. based inLibertyville, ILLINOIS (USA)
The A-Series Cast Double Flapgate Airlock Valves are designed for medium-pressure applications and standard temperatures to 650°F. Their cast iron housing, White Iron/Ni-Hard seats and flaps make them an economical alternative to rotary ...
Manufactured by:Wm. W. Meyer & Sons, Inc. based inLibertyville, ILLINOIS (USA)
The HDX Heavy Duty Extra-Tough Drop-Thru rotary airlock valves are designed to withstand high temperatures and pressure differentials up to 22 psi. This legendary design sets the standard by which all others in the industry are measured. It offers the heaviest gauge rotor vane stock of any competing product, extra thick endplates, flanges and housing walls, along with outboard mounted oversized ...
Manufactured by:Wm. W. Meyer & Sons, Inc. based inLibertyville, ILLINOIS (USA)
Direct Drives Provide one of the cleanest and most efficient ways to handle dry bulk material making direct drives ideal for Mining, Cement, Chemical, Food, Asphalt and Steel industries. ...
Manufactured by:Wm. W. Meyer & Sons, Inc. based inLibertyville, ILLINOIS (USA)
The HDBT Heavy Duty Blow-Thru rotary airlock valves are ideal for the Pneumatic Conveying of free-flowing material in food, grain, chemical, milling, baking, plastics and pharmaceutical applications. These units are uniquely designed to handle non-abrasive powders and where the product requires an assist in clearing the rotor vane pockets. The HDBT design is especially suited for low headroom ...
Manufactured by:Wm. W. Meyer & Sons, Inc. based inLibertyville, ILLINOIS (USA)
The HDSE Heavy Duty Side Entry Drop-Thru rotary airlock valves are designed for applications involving relatively large particles that cannot be reduced by the shearing action between the rotor blades and the housing at the inlet. They are also suitable for applications where small fines produced by the shearing action could cause damage to the system or create hazards. The built-in ...
Manufactured by:Wm. W. Meyer & Sons, Inc. based inLibertyville, ILLINOIS (USA)
The Meyer HDXP Heavy-Duty, NFPA design valves are custom applied units to your specific application. Meyer engineers review the application and evaluate the design based on KST values for the material, temperature, pressure and ambient conditions. Units can be built in cast iron, stainless and cast steel to match the specific NFPA requirements. Special XP switches, controls and motors are also ...
Manufactured by:Wm. W. Meyer & Sons, Inc. based inLibertyville, ILLINOIS (USA)
Meyer FV Fabricated rotary airlock valves are especially suited to handle large volumes of light to medium density products including large irregular material typically found in dust collection and low pressure pneumatic systems. These valves are available in carbon steel, stainless steel or abrasion resistant steel as an economical solution. The precision cut and welded valves feature flange ...
Manufactured by:Wm. W. Meyer & Sons, Inc. based inLibertyville, ILLINOIS (USA)
The CD Custom Design Series rotary airlock valves are a culmination of three generations of Meyer application expertise. These valves are designed to handle extreme operating conditions, unique customer needs or unusual installation requirements. Meyer sales engineers work directly with the customer to tailor a custom solution to their ...
Manufactured by:Wm. W. Meyer & Sons, Inc. based inLibertyville, ILLINOIS (USA)
The C-Series Double-Flapgate Airlock Valves are designed for high-pressure applications up to 20 psi and temperature extremes up to 1,650°F or higher depending upon the application. Meyer is the only manufacturer to offer a double-flapgate product that can operate reliably in pneumatic conveying systems at these pressures. The C-Series is available in both the “short” low-profile ...
Manufactured by:Wm. W. Meyer & Sons, Inc. based inLibertyville, ILLINOIS (USA)
Meyer Air-Operated Dust Tight Slide Gates add an extra dimension of control to bulk material handling systems. Designed for use in free-flowing solids, granules or powder form, they can be installed to control flow from outlets of hoppers, silos, mixers, screw conveyors, truck train or ship load-out systems, ...
Manufactured by:Wm. W. Meyer & Sons, Inc. based inLibertyville, ILLINOIS (USA)
The Meyer Pneumatic Screw Pump is a heavy-duty dry material injection pump. It is designed to feed dry pulverized material into a pneumatic conveying line. The Screw Pump works where other dilute phase feeders have failed due to problems like abrasive wear, friable materials or fine material dust. Unlike rotary airlocks, which require tight clearances to seal against the conveying air, the Screw ...
Manufactured by:Wm. W. Meyer & Sons, Inc. based inLibertyville, ILLINOIS (USA)
The HDAR Heavy Duty Abrasion-Resistant Drop-Thru rotary airlock valves are designed for severe applications where highly abrasive conditions exist. Offered in a choice of ceramic lined or DuraKast, both can significantly improve the wear factor on the valve and reduce the pre-mature equipment failure often associated with such ...
Manufactured by:Wm. W. Meyer & Sons, Inc. based inLibertyville, ILLINOIS (USA)
The F-Series Double-Flapgate Airlock Valves are designed for low-pressure basic dust collection applications with maximum 30″ WC pressure differentials, where low cost is critical and a rotary airlock or slide gate is unnecessary. Operating temperatures for the F-Series are normally in the 250°F range. Used under cyclones, baghouses and collection hoppers, these double flap valves are a ...
Manufactured by:Wm. W. Meyer & Sons, Inc. based inLibertyville, ILLINOIS (USA)
Maintenance Slide Gates isolate components in the system for easy removal and emergency shut-off. Meyer Maintenance Slide Gates are economical and reliable components used to isolate rotary valves below from hoppers above to control gravity batch unloading. These gates deliver a positive shut-off of material flow for service or replacement of the system rotary valve without the hopper being ...
Manufactured by:Wm. W. Meyer & Sons, Inc. based inLibertyville, ILLINOIS (USA)
The Meyer W.E.A.R. (Wear Elimination & Abrasion Reduction) Valve provides the ultimate package for your abrasive material build up applications. The valve internals are coated with a variety of wear resistant coatings specifically matched for the materials conveyed. Housing coating options include Heavy Chrome, Diamond Chrome, Ceramic and Chrome Carbide along with all White Iron cast designs. ...