- Home
- Equipment
Show results for
Refine by
Environmental Equipment & Supplies
9 equipment items found
Manufactured by:Xenemetrix Ltd. based inMigdal Haemek, ISRAEL
Xenemetrix’s Genius IF (Secondary Targets) EDXRF spectrometer offers a cost-effective solution in today’s market of elemental analysis. The analyzer provides a non-destructive qualitative and quantitative determination from Carbon(6) to Fermium(100), providing detection limits from sub-ppm to high weight percent ...
Manufactured by:Xenemetrix Ltd. based inMigdal Haemek, ISRAEL
The Vibratory Disc Mill is crushing unit specially designed to obtain grain sizes from a wide range of samples, such as glass, earth, slag, metallic oxides, ferroalloys, cements, ceramic elements, amongst other. It can quickly crush a great variety of different materials, from semisoft materials to the hardest, fragile or fibrous. Its simplicity of use and sturdiness make of this it a practically ...
Manufactured by:Xenemetrix Ltd. based inMigdal Haemek, ISRAEL
The versatility of the new MultiEQP-100 makes of this unit and essential instrument for the treatment and manufacturing of metallic samples. Effective for cutting, crushing and punching metallic samples, you can also include the capacity for pressing pellets that will be analyzed afterwards by RX. The objective of punching the samples is the obtention of pins for their analysis in Elemental ...
Manufactured by:Xenemetrix Ltd. based inMigdal Haemek, ISRAEL
Thanks to its capacity to quickly crush, mix and homogenize small volumes of sample, the EQM-400 Mill is your great ally for the preparation of samples. This Mill has been designed for the final preparation of small volumes of hard, semi-hard and fragile samples – up to 15 g. -. It can prepare two samples simultaneously and reduce them parting from an initial size of 0.8 to 1.5 mm. until ...
Manufactured by:Xenemetrix Ltd. based inMigdal Haemek, ISRAEL
The preparation of metallic samples is made nowadays using varied and different ways – according to the hardness of the metal -. Many times, the preheating of the sample is necessary in order to soften the metal and thus facilitate its subsequent processing, whether by crushing or punching. The EQH- 3.0 Induction Heater has been specially developed for heating up lollipops and bars for ...
Manufactured by:Xenemetrix Ltd. based inMigdal Haemek, ISRAEL
Xenemetrix’s X-Calibur Energy Dispersive X-Ray Fluorescence (EDXRF) spectrometer offers a cost-effective solution in today’s market for elemental ...
Manufactured by:Xenemetrix Ltd. based inMigdal Haemek, ISRAEL
Obtaining truly representative results in RX or LIBS depends very much on the previous step, the manufacturing of the pellet. The Hydraulic Manual Pellet Press EQO-1 has been specially designed to achieve high quality pellets, homogeneous and stable. Able to apply pressure up to 20 tons, it is simple and safe to manage, and it occupies very little room in the ...
Manufactured by:Xenemetrix Ltd. based inMigdal Haemek, ISRAEL
Xenemetrix’s laboratory Energy Dispersive X-ray Fluorescence (EDXRF) spectrometers offer the ultimate non- destructive solution in elemental analysis applications. The Silicon Drift Detector (SDD) simultaneously delivers lower electronic noise and a higher count rates, which is translated into higher energy resolution and faster results in comparison with Si-PIN ...
Manufactured by:Xenemetrix Ltd. based inMigdal Haemek, ISRAEL
Xenemetrix laboratory Energy Dispersive X-ray Fluorescence (EDXRF) spectrometers offer the ultimate non- destructive solution in elemental analysis applications. The Silicon Drift Detector (SDD) simultaneously delivers lower electronic noise and a higher count rates, which is translated into higher energy resolution and faster results in comparison with Si-PIN ...