- Home
- Equipment
Show results for
Refine by
Intereco Environmental Equipment & Supplies
6 equipment items found
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
Belt filtering table TF is used instead of a static thickener, with expensive concrete works, to thicken sludge before a digestor or a following dewatering unit (as belt press, plate filter press, centrifuge). Belt filtering tablet TF is complete with a vertical cylindrical reactor (with a variable speed mixer) to help sludge and polyelectrolite to react and separate from water. Flocculated ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
EDOM belt presses cover a small-medium range (500 to 1300 mm width), used in small municipalities and industries with their water treatment plants. Standard production is made with frames in hot dip zinc coated carbon steel, rollers and tank in AISI 304 SS. On request, EDOM may be made entirely in AISI 304 SS or AISI 316 SS. Belt presses can be supplied with self cleaning nozzles system, making ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
Dynamic thickener ROTOSET with a sludge capacity up to 60 m3/hr. The unit is complete with vertical cylindrical reactor with impeller for a perfect sludge/polyelectrolite mixing, with a centrifugal filter cloth washing water pump, able to recycle the thickener filtrate, this to avoid water consumption and the increasing of the WWPT hydraulic head. ROTOSET is assembled on a hot dip zinc carbon ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
After a twenty years long experience of units installed all over the World, INTERECO produce belt press to 3000 mm belts width. Apt for any type of sludge: Biological, chemical, paper milk dairy, inert and tanneries. To save money for the shipment, it is no necessary to use wood cages. For a belt press CAB 2000 is enough a 20” Flat Rack. Belt press EDOM and CAB 2500-3000 are divided in two ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
EDOM/L Belt presses with a pre-gravity zone and a sludge turnover, in size from 500 to 1200 mm belts width. This model is particularly apt for sludge with a low solids content (below 1.5% SS). Achieved capacity increases are up to 50% compared to the same standard belt press ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
To remove cake, INTERECO has different solutions: NT Belt conveyors and COC screw conveyors, both fixed or swivelling models as requested by the ...