ATI - Model 5D -Thermal Aerosol Generator

Cost-Effective
Save time and money in the most demanding multi-filter cleanroom installations. In high-volume HEPA and ULPA air flow environments, the 5D can significantly reduce the time it takes to conduct filter leak test scans, generating aerosol concentrations that can challenge the largest Air Handling Unit (AHU) configurations. With 1- to 2-minute warmup and cool-down times, begin testing high-flow systems without waiting, and be ready to store and move the unit minutes after the job is complete.

Rugged Portability
The 5D components are housed in a stainless-steel enclosure designed to withstand the rigors of portable filtration-system certification. Its lightweight, slim profile and supplied hand and shoulder straps make it an everyday, portable aerosol generator.

Flexible
Generating the widest aerosol concentration range available, the 5D accommodates both high- and low-flow environments, from cabinets¹ to the most demanding cleanroom installations. And with flex-fuel capability, the 5D can use the following reagents, including DOP (DEHP), PAO-4, DOS (DEHS), Ondina, or mineral oil.²

Safe and Reliable
An innovative design minimizing system thermal requirements provides a faster, simpler, and safer alternative to other available solutions. The 5D is certified to comply with all applicable electrical and safety requirements, including CE and RoHS 2 standards.

1. Per NSF/ANSI 49, use 4B/4BL/6D laskin nozzle generators for biosafety cabinet testing.
2. Parrafin Oil and Corn Oil should not be used with a thermal generator.

• Nuclear facilities
• Pharmaceutical manufacturers
• Medical facilities and cleanrooms
• Independent filter certifiers

• High aerosol output
• Widest range of system flow rates
• One minute warm-up time
• Flex-fuel capability
• Rugged portability
• Safe and reliable operation

Generation: Thermal vapor
Warm-Up and Cool-Down Time: 1-2 minutes
System Flow Rates: 833-119,000 m3/hr. (500 – 70,000 cfm)
Aerosol Output at Max Concentration: 100 µg/m3 @ 11,900m3/hr (100 µg/L @ 7,000 cfm); 10 µg/m3 @ 119,000 m3/hr (10 µg/L @ 70,000 cfm)
Max. Oil Consumption: 19.8 g/min (0.776 oz.)
Runtime: 41 minutes (at maximum oil consumption)
Particle Distribution: Meets ANSI/ASME N509/510
Flex-Fuel Capability: DOP, PAO-4, DOS, Ondina EL, and Mineral Oil
Standards: ISO 14644-3, CE RoHS 2 (2011/65/EU directive)

Size: 43 cm x 12 cm x 36 cm (17 in. x 5 in. x 15 in.)
Weight: 8 kg (approximately 17.6 lb) empty
Power: 120 VAC, 60 Hz, 10 Amps (for P/N 9300408 and 9300409); 240 VAC, 50 Hz, 5 Amps (for P/N 9300410 and 9300411)
Power Consumption: 1050 Watts
Electrical Fuses (120V): 5 x 20 mm, 10A, 250V, FAST BLO (2)
Electrical Fuses (240V): 5 x 20 mm, 5A, 250V, FAST BLO (2)
Aerosol Reagent: PAO-4, DOS (DEHS), Ondina, or mineral oil for Part Number 9300408 and 9300410DOP (DEHP) for Part Number 9300409 and 9300411
Liquid Aerosol Reagent Capacity: 1.1 l (64 fl oz) of reservoir capacity
Compressed Inert Gas Input: 3.45 bar +/- 0.07 bar (50 psi +/- 1.0 psi)
Compressed Inert Gas Consumption Rate: 6 lpm (0.21 cfm)
Duct System Requirement: Negative pressure required. Positive duct pressure requires ATI Positive Injection Pump (sold separately).
Duty Cycle: Intermittent ON/OFF or <4 hours ON and >1 hour off

Heavy-Duty Transport Case
Heavy-Duty Transport Case can carry the 5D generator, carrying straps, hose adapter and regulator. 5D generator, carrying straps, hose adapter and regulator are sold separately or can be purchased as an ensemble.

Inert Gas Regulator Assembly
Two single stage regulators are available to connect your 5D to an inert gas source – the CGA 320 for CO2 and the CGA 580 for N2, Ar or He.

Hose Adapter Assembly
Provides an easy method to adapt hose sizes ranging from 50.8 mm (2 in.) to 26.6 mm (1 in.) ID to your equipment.