- Radio Frequency Capacitance Point Level Indicator

From

0

The Auto-Set series RF capacitance point level monitors are used for detecting high, intermediate, or low levels of liquids, powders and free flowing granular solids stored in tanks, bins, silos or other containers.

The Auto-Set series incorporates simple push-button calibration with microprocessor enable/disable switch for total protection of stored values.  Once the Auto-Set is calibrated for the application it never has to be re-calibrated.  Data is stored in non-volatile memory so it is not affected by power loss.A four digit LED display shows set values for uncovered, covered and trip settings, allowing simple set-up and adjustment.  A set of voltage-free changeover relay contacts are actuated when the level of the material in the container reaches the probe.  The unit incorporates a unique power shield which automatically compensates for material build-up around the probe and on the sides of the container, preventing false indication.  The solid state electronics are housed in a weatherproof, flame retardant, glass-reinforced nylon enclosure.The Auto-Set series can be top or side mounted, and are available with 3-3/8, 8, 20, 32 and 44 inch 316 solid stainless steel probes. For applications up to 33 feet long (maximum), 304 stainless steel wire is used to extend the probe length. The Auto-Set can be used with container walls up to 14.5 inches thick.

  • High and Low Level Indication     
  • Fail-Safe
  • Push Button Calibration
  • Digital Display and Internal Timer
  • Power Shield Compensates for Material Build Up
  • 3 Inch to 33 Foot Probe Lengths

Customer reviews

No reviews were found for Auto-Set - Radio Frequency Capacitance Point Level Indicator. Be the first to review!