M2SYS - AutoTilt Desktop Iris Camera

In addition, the Next Generation AutoTilt desktop iris recognition camera features an extended capture range of 35 to 45 cm in the recognition mode, quickly capturing the highest quality iris images and offering a simple interface for all users, including those not acclimated with photo biometrics. An innovative, intuitive subject positioning face imaging sensor detects and displays the user’s face at up to 1.0 meter from the system on the high-resolution color display. The user is instructed to simply make their face fit the positioning “guide rails” and when the box around the face turns green, stop and wait until the image capture process is completed. Like a smart phone “selfie” image, this interface is very fast and highly intuitive, with typical capture times of less than 1.0 second.

User friendly
Highly innovative, intuitive and user-friendly design

Fast capture
Fast 1.0 second iris image capture time

Ease of use
Easy to understands instructions and vocal feedback for ease-of-use

Higher accuracy
Synchronized capture of two iris images and one face image ensures higher accuracy.

Localized language
Localized language support for on screen and vocal instruction.

Dimension: 166x   166x43mm
Weight: 800 to 850 grams,  depending    on hardware   configuration
Iris image  output: Meets  new  ISO 19794-62011    standard   for
160 pixels  across  1.0 cm iris. MTF meets  or exceeds  4.0 Ip/mm   @ < 60% contrast

Iris image  pixel  resolution: 640 x 480 pixels,  8 bit depth,  supports multiple   formats
BioAPI compatible: Yes,option
Operational    iris imaging distance   (Stand  of range) and depth  of field: 340 to 440 mm  range  (100 mm  depth)   in normal  mode  suitable  for enrollment
Software  option   for 340 to 480 mm range  (140 mm  depth)   in Expanded Depth  of Capture  mode  for  recognition only

Auto  tilt: Yes, internal
Height  range: 56 cm at center  of capture   range  (about
40 cm stand  off)

Iris inter-pupillary distance  covered: 45 to 85 mm
Iris time  of capture: Typically   about  0.5 second  from  time subject’s  eyes are placed  within   capture volume
IR illumination    for iris imaging: Dual LED: wavelengths    of 850 nm nominal   (about  50%); and  750 nm nominal   (about  50%)
Subject positioning indicators: Face feedback display with color cues for boxes surrounding the face:
Blue: Subject too far away
Green: Subject within capture volume
Red: Subject is too close
Iris maximum user positioning speed: 125 mm per second (4.9 inches per sec.) in “Z” direction (distance from front of system)
Face image  capture: Standard 24 bit color (for reference image)
Face recognition imaging: Optional on-board encoding and matching
Audio: 24 bit, 1.8 W embedded speaker Line out connector for external speaker
Operating temperature range: o to 45° C
Humidity: 10 to 90% RH, non-condensing
Iris eye safety  standard: IEC62471
Network   interface: 10/100 Base- T Ethernet (RJ45 connector) WiFi 802.11 bgn : optional
Other  standard   ports: USB host  (for service),  USB slave, audio
Physical access control configuration: other communication ports: Terminal and wired connectors for: Wiegand in/out, RS-232, RS-485, 2X TIL inputs, USB host (internal) 1 dry contact relay
Physical access control configuration: wall mounting with tamper switch: Detachable wall mount plate for easy installation and tamper switch standard in PACS configuration
Secu re I/O for access control: Option
Tamper  switch: Yes
Standard   mounting: Standard 1;4-20 UNC (camera tripod) Optional accessory base
Physcial access control configuration: wall mounting: Detachable wall mount plate for easy installation
Kensington   lock: Yes, standard
Power  requirements: Input 110 to 240 V AC, Output 12V DC, 3.0A – Adapter provided standard with system