Baugh & Weedon - Model Audit 106 -Thickness Gauges

Advantages of the Audit 106 include:

• Built in warning display eliminates risk of spurious readings
• 10 pre-set calibrations for commonly inspected materials

The Audit 106 is exceptionally tough,  housed in a rigid hermetically sealed ABS case, with a front panel membrane ensuring excellent environmental protection.  From pipelines to pressure vessels, tubes to tankers, castings to casings, boilers to bunkers,  the Audit series is ideal an ideal on-site instrument to measure abrasion wear rates, rates of corrosion, aid in predictive maintenance scheduling and assess working plan without the need to shutdown.

• Standard DT25 probe supplied, with integral cable
• 6mm test block mounted in front panel
• “Zero” facility
• Measuring Range 1.5mm - 99.9mm in steel
• Resolution 0.1mm
• Approx 100hrs continuous use battery life

• DT15 5 MHz probe, Subvis connector, with spring loaded pro holder, can inspect on curved surfaces down to a radius of 20mm
• D27 5MHz, side entry, Subvis connectors

• General : The Audit 106 is a microprocessor controlled precision instrument housed in a rigid injection moulded plastic case, with front panel membranes ensuring excellent environmental protection.
• Display : 4 digit LCD
• Range : 1.5mm to 99.9mm in steel
• Resolution : 0.1mm
• Accuracy : +- 0.1mm +- 1 digit, or +- 1%, whichever is greater
• Batteries : 2 x AA alkaline cells, internally
• Battery Life : Approx. 100 hours continuous use, equivalent to many weeks in practical situations
• Low Battery : Displayed when approx 10 hours continuous use remain available
• Auto Power Off : lnstruments automatically power off 60 seconds after last use
• Display Retention : 5 seconds from probe lift off
• Environmental Protection : Sealed to IP65
• Temp Range : Operation 5 to +55°C
• Storage : -20°C to +70°C
• Weight : 290 grams / 10.2 ounces
• Dimensions : 151 x 82 x 33mm
• Calibration :
• A106 Preset selectable programs for:
• 0 Steel
• 1 Stainless Steel
• 2 Alumrnium
• 3 Copper
• 4 70/30 Brass
• 5 SG lron
• 6 Flake lron
• 7 Perspex/Nylon
• 8 PVC
• 9 Polypropylene
• Zero Facility Available
• Confidence Check : A 6mm thick test block, mounted on the front panel enables the operator to check at will that the instrument and probe are functioning satisfactorily
• Validity of Data : A decimal point only display indicates that the probe work piece coupling is inadequate, or that an out of range measurement is being attempted