- Home
- Companies
- Scinomix Inc
- Products
- Scinomix - Model Sci-Print MP2 - ...
Scinomix - Model Sci-Print MP2 -Benchtop Semi-Automated Barcode Label Printer
The Sci-Print MP2 (model # 1043) is a benchtop semi-automated barcode label printer that prints and applies labels onto a variety of microplates* for sample tracking. It can be used in a manual stand-alone environment or integrated into a fully automated system.
The Sci-Print MP2 is a semi-automated barcode label printer that prints and applies labels onto a variety of microtiter plates for sample tracking. It can be used in a manual stand-alone environment or integrated into a fully automated system. Its rotating, height-adjusting platform provides the flexibility to print on all sides and two vertical levels of the plate and deep well blocks. Versatile software allows the system to be used as a stand-alone device, or integrated into automated plate handling systems.
The Sci-Print MP2 comes with standard labels to best optimize your labeling instrument. Check them out!
FEATURES- 600 dpi thermal transfer printer
- Labels up to four sides of a plate
- Easily integrated into third-party systems
- Standard label size: 0.25″ (h), 2.0″ (w)
- Windows based software driver
- Increases efficiency and productivity in the lab
- Diagnostics for testing and setting up
- Consistent, accurate label placement
- Small footprint saves valuable space in the lab
- Can print range of standard barcodes including 1D and 2D
These are the current symbologies that we implement. If you have a need outside of this list, please contact us. We are always interested in helping customers find solutions.
- Code 128
- Code 39 (full ASCII)
- Interleaved 2 of 5
- Data Matrix (2D)
- System Requirements: Windows 7 with Service Pack 1, Windows 8/ 8.1 , Windows XP with Service Pack 3, Microsoft.NET Framework 3.5 with Service Pack 1 or greater.
- Network Requirements: Connects to a computer via RS232 serial port. A serial port or USB-serial port adaptor is required on the computer.
- Air Requirements: 80-90 PSI @ 2.5 CFM. The air supply must be oil/contaminant free, with an inline regulator and air dryer.
- Main Power Requirements Printer: 110-240V AC @2A 50-60Hz, Power Supply: 120-240VAC @ 1.4A, 50-60Hz
- Provided Power Supply: Output Voltage: 24 V DC; Max Output Current: 2.71 A; Max Output Power: 65 W; Max Ripple and Noise: 240 mV p-p
- Transport and Storage Temperature: -20 degrees C to +55 degrees C
- Operating Environment: (Indoor use only)
Temperature: 10 degrees C to 40 degrees C
Humidity: 20% to 80% non-condensing
Altitude: Up to 2000M
Main Supply: +/- 10% Rated Voltage
Transient overvoltage: Overvoltage category I , Printer (Overvoltage category) II
Rated pollution: Pollution degree II - Physical Dimensions: Height: 14.3” (363mm), Width: 8.64" (219.3mm), Depth: 29.8” (757.5mm), Weight: 37.5 lb. (17KG)
- Labeling Rate: 4 seconds per label
- Plate Height Specifications: Max Height: 46mm, Min Height: 6mm (*plate requirements)
- Transport and Storage Temperature: -20 degrees C to +55 degrees C
- Certifications: CE, FCC