BinMaster - Model M - 730-0635 -High Temperature 3D Level Scanner
3D Level Scanner - M with extended temperature up to 365°F with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Accurate readings of level and volume of stored materials based on a 70º beam angle. Wider beam angle is appropriate for silos up to 45’ in diameter and 200’ tall, and where improved accuracy in smaller silos is required. Unit comes with internal LCD display and 3DVision software. Hazardous location approved, FM listed for Class I, II, Division 1, Groups C, D, E, F & G. One year warranty.
3DLevelScanner HT: Accurate Volume in High Temps
Use the 3D HT in an operating temperature range up to 356°F (180°C) to accommodate higher temperatures in materials that are heated in the production process and then conveyed into storage.
Do you process at high temps before storage? Need a sensor that can detect irregular piling?
Advanced acoustics-based technology that works in dusty silos and high temps.
Common uses for the 3D HT:
- Measuring the level and estimating the volume in storage silos containing high-temperature materials
- Silos with materials generating high dust and humidity
- Large silos with uneven and difficult-to-measure material surfaces
- Challenging materials such as clinker, alumina, frac sand, and fly ash
- Industries including cement, powder, aluminum, and frac sand
5 Ways 3D HT is different:
- Measures multiple points, not just a single distance
- Optional 3D visualization of material topography
- Detects cone up, cone down, and sidewall buildup
- Provides minimum, maximum, and average distances
- Accounts for surface irregularities for accurate bin volume
Inventory Management
Ensure adequate supply for production, prevent material shortages.
Remote Monitoring
Manage inventory while in the plant, while traveling, or away from the office.
Vendor Managed Inventory
Engage suppliers in replenishing the supply chain to optimize purchasing.
Storage Dome Monitoring
Monitor conveyed or truck loaded materials in large storage structures.
Pile Monitoring
Manage pile height, size, and volume of bulk materials.
- SKU: 730-0635
- Means of Measurement: 3D Acoustic
- Measurement Type: Continuous Level
- Medium: Solids
- Voltage : 20-32 VDC
- Outputs: 4-20 mA, MODBUS protocol, RS-485
- Ambient Temperature: -40°F to +356°F (-40°C to +180°C)
- Process Temperature: Up to +356°F (180°C)
- Approvals: No hazardous location approvals
- Enclosure Type: IP 67
- Enclosure Material: Die cast aluminum
- Mounting: Mounting Flange
- Conduit Entry: 0.5" NPT
- Range: 200 ft. (61 M)