Biocell - Commercial Pump Stations
Biocell Water manufacture and supply commercial pumping stations for all types of commercial wastewater applications. We also manufacture and supply adoptable pumping stations and solutions for all types of large scale and industrial wastewater applications. Our commercial pumping solutions have proven to be cost effective and reliable, as can been seen in our extensive portfolio of commercial case studies. We offer ready made and bespoke solutions for pumping many types of wastewater such as sewage, stormwater, effluent and highly contaminated runoff/water. We offer dry well and wet well pumping systems and also packaged dry well pumping systems. Additionally, we have pumping solutions with integrated solids separation available. There are no limits on flow rate, installation depth or pumping distance – our engineers provide solutions to suit any site restrictions.
- Commercial pump stations and industrial pumping solutions
- Cost effective and reliable pump systems
- Adoptable pump stations
- Effective management of stormwater, effluent and highly contaminated runoff/water
- Bespoke design for any application
- Meet Irish Water specifications for pumping to mains sewer
- No limits on flowrate, installation depth or pumping distance
- High capacity lifting stations
- Dry well and wet well pump stations
- Integrated solids separation
- Pumping stations for hazardous and non-standard applications
- Wide range of ancillary products for pumping stations
- Contact us for information, advice or a free quotation
Biocell can offer pumping solutions for any site regardless of constraints. For deep installations, we have a sectional vertical precast pump suitable for depths of +15m. We are one of the only companies that can offer this bespoke precast solution that avoids the need for concrete backfill. It is simple to install where groundwater causes a buoyancy issue.
We also have a horizontal precast sectional tank that can be extended to provide unlimited storage volumes. This horizontal sectional is suitable for above or below ground installation. All pump stations come with separate valve chambers as standard, and we can incorporate any degree of overflow/emergency storage into the design.
Adoptable Pump Stations For Every Commercial or Industrial ProjectBiocell has extensive knowledge and technical expertise to match specific pumps to project requirements. Pump selection for industrial or commercial applications must take many parameters into consideration, with regard to the sump, the influent and the rising main. Access considerations for maintenance also play a major role in the design stage. Incorrect pump selection can lead to operational issues so allow our experts to guide you in your choice. Our technical experience and expertise means that we can supply pumps and ancillaries to meet any flowrate and head requirements. In addition, our pump stations for new housing estates are built to meet the Irish Water guidelines for pumping to the mains sewer.
Some typical applications we supply pumping stations for are as follows;
- Raw sewage pump stations
- Stormwater management pump stations
- Effluent pump stations
- Basement pump stations
- High capacity lifting stations
- Pumping of contaminated wastewaters containing solids
- Pumping of washwaters containing large particles and aggregates
Biocell offers a full range of ancillary products for either supply with our commercial pump stations or as an add on to an existing pump. Ancillary items allow for improved control, automation, access and maintenance of pump stations for industrial applications. Some ancillaries we offer include the following;
Odour Control – Activated carbon filters for vents, in addition to bespoke made to measure carbon filters for access manholes. We can also supply chemical dosing systems to reduce septicity in rising mains and pump sumps.
Easy Lift Covers – Galvanised and cast iron manhole covers with spring loaded easy open access. This is mandatory for larger manhole covers to comply with H&S and manual handling regulations to facilitate easy access for emergencies and regular maintenance.
Guide rails and pedestals – Galvanised guide rail systems and pump pedestals for any pump model/size. Designed for any sump depth to permit rapid pump removal for maintenance/replacement.
Davit Sockets and Lifting Equipment – A range of preinstalled or mobile lifting equipment to facilitate pump maintenance and replacement.
SCADA Monitoring – We have the capacity to link all pump stations to our SCADA system to allow for remote monitoring and control of all pumps and ancillary devices.
Packaged Valve Chambers – Packaged precast and HDPE valve chambers to match rising main pipework are available for new pump stations and as an add-on to existing pump stations.
Anti-Siphon Valves and Over-pumping Connections – Anti-siphon valves to prevent pump overrun caused by siphoning due to rising main layouts. Bauer over-pumping connections to facilitate sump emptying.
Control Panels – CE marked control panels built to match your requirements. Off the shelf panels also available. All alarms, generator switchovers, amp meters, run meters, manual/automatic switches, etc. supplied as standard. Compliant with all local standards.
How to Order a Commercial Pump StationGet in touch if you would like to price a pump station for your commercial project or if you would like to enquire about a pumping system for an industrial project. A member of our technical sales team will be able to provide you with a free quotation or design proposal. We are happy to provide extra information or answer any questions you may have about a pumping system or solution.