4 the Birds - Bird Repellent Gel

Before Applying:

• Clean the surfaces thoroughly. Remove dirt, dropping and other debris. Product must be applied to a clean and dry surface.
• When cleaning surfaces, take the necessary steps to protect yourself against bird waste hazards.
• Treat porous and textured surfaces with an under coating such as paint or sealer. See the product label for more details.
• 4 The Birds works in hot and cold temperatures. It retains its tack from 15o F. up to 200o F.
• 4 The Birds is labeled for use in repelling pigeons and starlings. Do Not apply where desirable bird species are present.

Coverage - 4 The Birds is applied to clean and dry surfaces in beads. When applied as directed, each cartridge should yield 10 feet of repellent bead.

1. Cut the tip at a slight angle, leaving the lip on the spout so you can cap partially used containers.
2. Load the cartridge in a caulking gun and break the seal. When applying repellent, press against the surface to help ensure good adhesion.
3. Apply beads of repellent no larger than1/2" wide by 1/2" high. DO NOT COVER THE ENTIRE SURFACE.
4. For surfaces less than 4" wide, apply one bead of repellent 1" from the outside edge. For surfaces 4" and wider, apply one bead 1" from the outside edge and additional beads for every additional 2" in surface depth.
5. Leave a small gap in the bead of repellent every 1 to 2 feet to allow for water drainage.

• Use mineral spirits to remove product from treated surfaces, equipment or other materials.