SeTAC - Black Box Kit - Vibration Monitor & Recorder
The SeTAC Basic kit is the ideal, simple solution to monitor and record all significant vibrations and collision events on machine tool during its entire life. Able to store up to 12.000 events within the internal memory, perfectly categorized in terms of type, value and event time, the SeTAC Basic is perfect to:
- Check the correct utilization of the machine, assuring that no excessive vibration level or collisions are present during the working process.
- Optimize the spindle maintenance by monitoring the total spindle exposure to vibrations, SeTAC calculates the actual spindle residual life, ensuring therefore that spindle overhaul is performed at the right time.
SeTAC,by direct measuring actual dynamic loads on spindle, ensures optimization of maintenance plan.
With the Basic interface, SeTAC works as a “Black Box” independent from the machine tool electronics. The configuration and the retrieving of the registered data in the sensor memory is done via PC through USB connection with dedicated software.
A standard M12 8 poles extension cable is used to connect the sensor to the interface.
SeTAC is usually sold as a Kit (Sensor + Interface). However, it is possible to purchase both items separately. Connection cables are standard M12.The SeTAC sensor is used in a lot of different applications; take a look at our dedicated sections to learn more.
- Full scale ±18g
- Bandwidth 0÷2500 Hz
- Resolution 0,00075g
- Dimension 30×55,5×15 mm
- Weight 55g
- Supply Voltage 18-36 VDC
- Protection grade IP67
- Shock Resistance 10.000 g
- Temperature Range 0÷70°C