BloApCo - Model 3B -Trim Cutter

FromBlower Application Company, Inc. (BloApCo)

The 3B trim cutter offers proven BloApCo design with new, innovative maintenance and operating features to achieve higher performance and economy. Driven by a 3/4-hp electric motor, the 3B efficiently impact-cuts light paper, light SBS, and chipboard from 3 to 20 mil thick. Wear-resistant HCHC and T-15 knives handle plastic film, pressure-sensitive stock and light paper. One cutter can handle multiple ribbons of trim, depending on weight and thickness. The cut trim is reduced for pneumatic conveying, baling, disposal or recycling.

Most popular related searches

Cutting with one stationary bed knife and two rotating knives, the. 3B makes two cuts per revolution at speeds from 500 to 2,000. rpm. The unit passes 1,000 cfm of air at a static pressure loss of. 1.5" wg at air velocities of 5,000 fpm. Adjustment screws in the. rotor make the knives individually adjustable: knife clearance is. easy to set, and the blades are easily removed for sharpening.. Final "in-body" rotor grinding is not required. Open rotor design. allows fast, free flow of cut material through the cutter housing.

BEST USES
Removal of continuous film, Edge Trim and Matrix

INDUSTRIES
Converting, Paper, Film, Plastic, Non-woven, Foils

MATERIALS

From 0.00025 inches (6.35 ¼m) to 0.25 inches (6350 ¼m)
light paper
poly films
recording tape
Mylar
fine nylon fibers
non-wovens
paper
light fiberboard
corrugated board
solid bleached sulfate, paperboard
plastic film
foil laminates
pressure-sensitive stock
light, non-ferrous foils
heavy fiberboard
solid bleached sulfate paperboard
laminated kraft, heavy non-ferrous metal up to 0.025 in.

BloApCo - Model 3B -Trim Cutter

Precise Operation