ProVent - Model Uni-Wash Series -Booth Wet Dust Collector

Wet dust collection is required for the safe collection of combustible metal dust. Our unique scrub design has been an industry standard for over 50 years and continues to lead the industry in wet dust collection efficiency.

Wet dust collection booths are utilized when source capture of an application is not practical.  Dust from your application will be contained within the booth.  Air is continuously pulled into the Uni-Wash UEWC at the rear of the booth, filtered and exhausted into the ambient air of the facility.

ProVent Enclosures can be manufactured specifically for your process with various sizes and configurations.  Several options are available to further customize.

• Sound Insulation
• Strip Curtains
• Crane Slot
• Celling and Side Lighting Configurations

NOTE: We do NOT recommend returning air to the front of the booth to be recycled due to potential health hazards and air flow disruption.  Filtered air should be exhausted to the ambient air of the facility, or exhausted outside. More Information

Orifice / Impingement Scrub

The large diameter, patented scrub cone assembly inside our UEWC series dust collector works above the water line.  This orifice/impingement design never clogs or loses airflow as with submerged internal venturi designs which gum-up and impede flow over time. There are no pumps or spray nozzles to clog or fail with the Uni-Wash design.

Low-Cost Operation

Using water as a filtration medium has its advantages for our UEWC series dust collector. Collected dust resides as a sludge in the bottom of the sump for easy removal or can simply be drained away. There are no disposable filters to replace saving money and air borne contamination hazard. Our scrub design also leads to a lower static pressure requirement in the machine, which means less horsepower is required. This lowers the cost of the machine and saves energy over the life of the machine.

High Efficiency Motors

We use plug fans for our UEWC Series, because the required static pressure is low. This in turn saves money on the machine cost. We use high efficiency direct drive motors to lower operating costs over the lifetime of the equipment.

ProVent, A Name You Can Trust

The Uni-Wash UEWC seiers wet dust collector has been continuously manufactured for over 50 years and continues to be the leading technology for capturing dust without the added cost of cloth filter media. Initially designed for the safe collection of combustible metal dusts, manufacturers have utilized this technology in many other difficult applications with success in more recent years.