- Home
- Equipment
Refine by
A Lok Environmental Equipment & Supplies
49 equipment items found
Manufactured by:National Land Management based inPhoenix, ARIZONA (USA)
Site-Lok is a highly concentrated, proprietary organic emulsion developed to manage air quality and water resources both during and after projects in arid climates with high-tension soils. It will effectively and efficiently mitigate dust and materials migration and significantly reduce water usage and operational costs on any project by 75%. Site-Lok is manufactured using select raw products ...
Manufactured by:U.S. Pipe. - a subsidiary of Mueller Water Products, Inc. based inBirmingham, ALABAMA (USA)
The gold standard for push-on joint restraint. U.S. Pipe's FIELD LOK 350® Gasket is an extremely successful, trouble-free means of joint restraint in 4" - 24" sizes for well over one million Ductile Iron pipe and fitting joint assemblies across North ...
Manufactured by:A-Lok Products, Inc. based inTullytown, PENNSYLVANIA (USA)
WATER-STOP Connectors easily install to the outside diameter of corrugated or smooth wall pipe. Designed for use with new or existing round or flat wall structures to seal cold joint pipe ...
Manufactured by:Westlake Pipe & Fittings based inHouston, TEXAS (USA)
The Certa-Lok CLIC spline ring helps assembly because the operator no longer has to ensure the spline grooves are aligned ‘just right’ between pipe lengths and the spigot isn’t at risk to be over inserted. The new, next generation Certa-Lok CLIC offers improved tensile strength for use at greater well depths and significantly streamlines the contractor’s pipe joint ...
Manufactured by:Westlake Pipe & Fittings based inHouston, TEXAS (USA)
Certa-Lok® Drop Pipe offers an instant, ready-to-use joint utilizing NAPCO’s unique, field-proven coupling/spline locking design, which allows submersible pumps to be set or pulled quickly and with ...
Manufactured by:A-Lok Products, Inc. based inTullytown, PENNSYLVANIA (USA)
The Z-LOK Connector is a flexible pipe to manhole connector specifically engineered to produce a positive watertight seal for pipes entering precast concrete structures and the structure itself. The Z-LOK Connector is manufactured to meet or exceed all material and test requirements set forth in ASTM C-923, ASTM C-1478, ASTM C-1644 and ASTM ...
Manufactured by:A-Lok Products, Inc. based inTullytown, PENNSYLVANIA (USA)
The Z-LOK STM Connector was designed to address the need for a boot style connector for large diameter pipe, making it ideally suited for stormwater application. Available for 6'-102' pipes. A watertight connection is produced by tightening the Redi-LOK Clamp to the specified torque value. The Z-LOK STM Connector is manufactured to meet or exceed all material and test requirements set forth in ...
Manufactured by:A-Lok Products, Inc. based inTullytown, PENNSYLVANIA (USA)
The revolutionary G3 BOOT SYSTEM makes installation into a structure simple and fast. Just install the connector perpendicular to the hole and tighten the stainless steel nut. As the nut is tightened, a compressive force is applied to the G3 band ends, causing the ends to slide past each other into straight alignment. This movement increases the bands overall circumference and compresses the ...
Manufactured by:Hy-Lok D Vertriebs GmbH based inOyten, GERMANY
Because oft the finely manufactured stem tip and valve design the MT1 series metering valves allow exact ...
Manufactured by:A-Lok Products, Inc. based inTullytown, PENNSYLVANIA (USA)
The A-LOK STM is a flexible pipe-to-manhole connector designed for the prevention of soil and water infiltration into stormwater sewer systems. This minimizes the chance of pothole formation and sediment build-up in the storm system, saving states and municipalities money over the life of the structure. It can be used with round, elliptical and arch shaped pipes for curved and flat wall ...
Manufactured by:A-Lok Products, Inc. based inTullytown, PENNSYLVANIA (USA)
The INSERTA-LOK is a flexible pipe-to-manhole connectors specifically engineered to produce a positive watertight seal for pipes entering precast concrete structures and the structure itself. The INSERTA-LOK Connector is manufactured to meet or exceed the requirements set forth in ASTM C-923 and ASTM ...
Manufactured by:Hy-Lok D Vertriebs GmbH based inOyten, GERMANY
Hy-Lok compression fittings are precision-engineered solutions favored in numerous industries including chemical and petrochemical, oil refineries, power generation, shipbuilding, and the manufacturing of paper and microelectronics. Each fitting comprises a body, front ferrule, rear ferrule, and a nut, utilizing a two-ferrule design to address variances in pipe diameter, wall thickness, and ...
Manufactured by:FIT-LOK based inMumbai, INDIA
SS 304 Precision Tubing Supplier, we can help with all Grade 316 SS Needle tubing supply ...
Manufactured by:FIT-LOK based inMumbai, INDIA
Get the best deals on top-quality SS 304 Compression Tube Fittings and DIN 1.4301 Instrumentation Tube Fittings from trusted suppliers offering competitive rates in ...
Manufactured by:FIT-LOK based inMumbai, INDIA
We are trusted SS 304L Compression fitting manufacturer in ...
Manufactured by:A-Lok Products, Inc. based inTullytown, PENNSYLVANIA (USA)
Dura-Plate 100 Epoxy Mortar provides concrete and masonry surfaces with increased chemical and abrasion resistance. The three-part, resin aggregate system forms a trowelable epoxy mortar that applies easily to overhead and vertical concrete surfaces. When cured, Dura-Plate 100 Epoxy Mortar forms a high strength protective coating for sanitary sewer lift stations, manholes, and other structures. ...
Manufactured by:KP-LOK Houston Inc based inHOUSTON, TEXAS (USA)
KP-LOK Manifold Valves are available in a variety of material and end connections with 2&3 and 5 instrument ...
Manufactured by:KP-LOK Houston Inc based inHOUSTON, TEXAS (USA)
KP-LOK Manifold Valves are available in a variety of material and end connections with 2&3 and 5 instrument ...
Manufactured by:KP-LOK Houston Inc based inHOUSTON, TEXAS (USA)
KP-LOK Manifold Valves are available in a variety of material and end connections with 2&3 and 5 instrument ...
Manufactured by:Hy-Lok D Vertriebs GmbH based inOyten, GERMANY
With its different connections, the spring-loaded safety valve AV619 offers blow-off volumes from 2.6 to 90.7 m3/h with opening pressures from 5 to 500 mbar that can be individually set at the factory. Different gasket materials are available, depending on the gas type. Thanks to its compact dimensions, the safety valve offers easy ...