- Home
- Equipment
Refine by
Afp Environmental Equipment & Supplies
9 equipment items found
Manufactured by:Advanced Fluid Power, Inc. (AFP) based inTheodore, ALABAMA (USA)
Piston accumulators use pistons as separating elements. They can handle much higher gas compression ratios (up to 10:1) and flow rates as high as 215 litres (57 gallons) per second. However, the piston inside the accumulator causes internal friction that negatively affects reaction speed (i.e. has slower response times greater than 25 ...
Manufactured by:Advanced Fluid Power, Inc. (AFP) based inTheodore, ALABAMA (USA)
Gear pumps are simple and economical pumps. These pumps create pressure through the meshing of the gear teeth, which forces fluid around the gears to pressurize the outlet side. For lubrication, the gear pump uses a small amount of oil from the pressurized side of the gears, bleeds this through the hydrodynamic bearings, and vents the same oil either to the low pressure side of the gears, or ...
Manufactured by:Advanced Fluid Power, Inc. (AFP) based inTheodore, ALABAMA (USA)
Piston pumps are typically much more complicated and are often available in wither fixed or, commonly, variable displacement configurations and with pressure compensation. These are big words that mean that piston pumps can usually adapt to the system pressure, providing maximum efficiency and flexibility. They are often used in “closed center” systems where the pump displacement ...
Manufactured by:Advanced Fluid Power, Inc. (AFP) based inTheodore, ALABAMA (USA)
Severe duty construction with OSHA guard. Serviceable Core. Thermal capacity to 1,400 hp (1,043 Kw). Operating temperature of 300°F at 200 PSI. Electric, hydraulic, or external drive. Optional: built-in bypass valve. Can be customized to fit any applications. Computer generated data sheet available for any application. Field changeable drive from electric to hydraulic. Cools: Fluid power ...
Manufactured by:Advanced Fluid Power, Inc. (AFP) based inTheodore, ALABAMA (USA)
Keeping your hydraulic oil clean will extend the life of your system and the system components. Down time due to a failed pump, valve, or the entire system can be costly and time consuming. The leading cause of these failures is dirty or contaminated hydraulic ...
Manufactured by:Advanced Fluid Power, Inc. (AFP) based inTheodore, ALABAMA (USA)
A diaphragm accumulator consists of a fluid section and a gas section with the diaphragm acting as a gas-proof screen. The fluid section is connected with the hydraulic circuit, so that the diaphragm accumulator draws in fluid when pressure increases and the gas is compressed. When the pressure drops, the compressed gas expands and forces the stored fluid into the circuit. At the base of the ...
Manufactured by:Advanced Fluid Power, Inc. (AFP) based inTheodore, ALABAMA (USA)
A bladder accumulator is the most commonly used hydro-pneumatic accumulator. The bladder is filled with nitrogen and fitted in a welded or forged steel pressure vessel. The bladder is made of an elastic material, e.g. rubber. The gas pre-charge pressure can be adapted via the gas inlet/outlet valve on top of the bladder ...
Manufactured by:Advanced Fluid Power, Inc. (AFP) based inTheodore, ALABAMA (USA)
In vane pumps, a number of vanes slide in slots in a rotor which rotates in a housing or ring. The housing may be eccentric with the center of the rotor, or its shape may be oval. In some designs, centrifugal force holds the vanes in contact with the housing, while the vanes are forced in and out of the slots by the eccentricity of the housing. In one vane pump, light springs hold the vanes ...
Manufactured by:Advanced Fluid Power, Inc. (AFP) based inTheodore, ALABAMA (USA)
Crushing Force: 38,000 lbs. Crushing Time: Under 30 seconds (one way stroke). Crushing Height: Crushes drum to under 4 1/2”. Heavy Duty Construction: Made from 7/8” thick rolled steel ...