- Home
- Equipment
Refine by
Alemnis Environmental Equipment & Supplies
10 equipment items found
Manufactured by:Alemnis based inThun, SWITZERLAND
Controller host in a laptop computer for high performances control loop (200Hz frequency): LapTop (dual core i3, 4GB RAM, Windows 10 or newer operating system); Multifunction I/O boards for load and displacement measurements (50k Samples/s) and indentation control (100k samples/s); -30V to + 150V piezo amplifier for driving the indentation head; Driver for micro-positioning ...
Manufactured by:Alemnis based inThun, SWITZERLAND
Alemnis pushes the frontiers of numerous nanomechanical testing methods with a high-precision nanoindenter assembly (the ASA) and a range of complementary accessories, consumables, and ...
Manufactured by:Alemnis based inThun, SWITZERLAND
Real time controller based on FPGA technology for high performance control loop (up to 5kHz frequency for the indenter with or without the VHSRM, and 100kHz with the optional UHSRM): LapTop (dual core i3, 4GB RAM, Windows 10 or newer operating system); Very high performance multifunction I/O boards (up to 1M samples/s for load measurement with the VHSRM and the UHSRM); -30V to + 150V piezo ...
Manufactured by:Alemnis based inThun, SWITZERLAND
Very High-strain rate module, actuating 1-axis, sensing 1-axis, controlled strain rate up to 1’000 s-1 or higher. (requires ECO). The VHS-1-1 can reach a controlled constant strain rate of 1’000 s-1 calculated for a 10 µm micro-pillar. In the case of indentation, the strain rate can be even higher (typical values are 7’000 s-1 at 100 nm depth and 2’000 s-1 at 350 nm ...
Manufactured by:Alemnis based inThun, SWITZERLAND
Several challenges exist when designing an in-situ mechanical testing assembly compatible with X-ray beamlines for computed tomography. The assembly must be light weight as it must often be mounted on top of several motion stages. Also, the weight of the load frame must be distributed as symmetrically as possible about the rotational axis. In addition, the assembly must be sufficiently open to ...
Manufactured by:Alemnis based inThun, SWITZERLAND
The Alemnis Standard Assembly (ASA) comes with a custom flange and mounting adapter for installation in any Scanning Electron Microscope (SEM) with a large-enough ...
Manufactured by:Alemnis based inThun, SWITZERLAND
The Alemnis Standard Assembly (ASA) can be used as a standalone micromechanical testing system on any sturdy laboratory bench. For such ex-situ operation, it is recommended to place the ASA in a dedicated enclosure (see Standard Enclosure) and place the enclosure on an anti-vibration table to minimize noise. The ASA can also be mounted under an optical microscope giving a lateral view for ...
Manufactured by:Alemnis based inThun, SWITZERLAND
Ultra High-strain rate module, actuating 1-axis, sensing 1-axis, controlled strain rate up to 10’000 s-1 or higher: (requires ECO). The UHS-1-1 can reach the unique performances of controlled constant strain rate of 10’000 s-1 calculated for a 10 µm micro-pillar. In the case of indentation, the strain rate can be even higher (typical values are 70’000 s-1 at 100nm depth ...
Manufactured by:Alemnis based inThun, SWITZERLAND
The Low Temperature Module (LTM-CRYO) is retrofittable to the Alemnis Standard Assembly (ASA). It can be used in air but condensation may form on the sample surface so ideal operation should be in vacuum (e.g. inside a SEM). It comprises of independent tip and sample heating and ...
Manufactured by:Alemnis based inThun, SWITZERLAND
The high temperature module is retrofittable to Alemnis Indenter. It can be used in air up to 200°C. For higher temperature, the Indenter should operate in vacuum (e.g. inside a SEM). It comprises of independent tip and sample ...