- Home
- Equipment
Refine by
Anteris Environmental Equipment & Supplies
8 equipment items found
Manufactured by:Process Metrix, LLC., a part of the Vesuvius group based inPleasanton, CALIFORNIA (USA)
ANTERIS Mobile is Process Metrix’s first product line. The unit can be used to measure fixed vessels’ (B0F, A0Ds) remaining refractory thickness, and can be multiplexed on different furnaces within the same ...
Manufactured by:Process Metrix, LLC., a part of the Vesuvius group based inPleasanton, CALIFORNIA (USA)
Door mounted for BOF applications. BOF plants which have tight schedules and want to improve both safety and productivity have a keen interest in this product. The door-mounted unit may not work for all door types, but when they do the results are ...
Manufactured by:Process Metrix, LLC., a part of the Vesuvius group based inPleasanton, CALIFORNIA (USA)
Whichever location is right for a fixed laser ladle project, if it does not require an arm and time is tight, then the ANTERIS 300c is an easy and clean way to speed-up installation in this self-contained solution. The shipping container is used as the enclosure for the laser unit. All components are pre-tested at the factory and the few connections to the plant (all fluids and signal) can be ...
Manufactured by:Process Metrix, LLC., a part of the Vesuvius group based inPleasanton, CALIFORNIA (USA)
Door mounted for BOF applications. BOF plants which have tight schedules and want to improve both safety and productivity have a keen interest in this product. The door-mounted unit may not work for all door types, but when they do the results are ...
Manufactured by:Process Metrix, LLC., a part of the Vesuvius group based inPleasanton, CALIFORNIA (USA)
One Movement, One Scan, 360 Degrees Coverage. ANTERIS 360 laser contouring system combines high-speed laser scanning technology with a robust mechanical platform and easy-to-use HYPERION 3D output software. It is designed to be inserted in the vessel and perform a single, 360 degrees scan, which will capture the full vessel. It can be used in ladle applications to “see” past the skull ...
Manufactured by:Process Metrix, LLC., a part of the Vesuvius group based inPleasanton, CALIFORNIA (USA)
The only laser scanner developed specifically for molten metal applications. The highly reliable ANTERIS 300 scanner provides lining thickness information that defines the refractory condition of ladles, converters, AOD’s, EAF’s and Q-BOP’s. ANTERIS 300 series (300s, 300r, 300c, 300dm, 300g) covers a wide range of possible applications defined by the existing layout. All steel ...
Manufactured by:Process Metrix, LLC., a part of the Vesuvius group based inPleasanton, CALIFORNIA (USA)
A cut in the floor… For most refractory thickness measurement in ladles, a simple layout can be found which does not require much civil works. For example, an installation on the furnace floor above the ladle transfer car is often available. Such cases will be the best value as there is no need for extra hardware and the installation is typically ...
Manufactured by:Process Metrix, LLC., a part of the Vesuvius group based inPleasanton, CALIFORNIA (USA)
Robotic arm. In many EAF cases, the laser must be brought over the furnace when the furnace roof is removed. A robotic arm may be needed in some ladle applications as well. In almost all cases Process Metrix and Vesuvius can offer a custom-made and flexible solution with a robotic arm design and turn-key ...