- Home
- Equipment
Refine by
Aquaturbo Environmental Equipment & Supplies
17 equipment items found
Showcase
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
The Aquaturbo AER-AS is a high-speed floating mechanical aerator. It consists of a high efficiency ambient operated motor customized to Aquaturbo wet environment operating standards. The unit is constructed from stainless steel and consists of a one-piece float, a suction cone, and a two flight Archimedes style Screwpeller®. The Screwpeller® generates a flat and large-diameter spray ...
Premium
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Discharges the volume of clean water without disturbing the sludge blanket or floatable materials on the surface. Ideal for the SBR Process, Sludge Settling Tanks, Sludge Thickeners plus the general decanting ...
Premium
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Totally independent Aerator and Mixer. Air Provided by Blower with Variable Frequency Drive which can regulate oxygen supply from zero to maximum capacity; whilst retaining full mixing and oxygen dispersion capability therefore the units are ideal for SBR ASP & MBR ...
Premium
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Multi-purpose, multi-directional, submerged mixer ideal for general mixing and flow generation; adaptable to many tank configurations. Open, dual helical impeller providing intensive; directional sub-surface mixing pattern with minimal surface disturbance and low power to volume ...
Premium
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
As a floor mounted submersible aerator with intensive mixing action, it is ideal for deep tanks, existing pocket ASPs with moderate to high sludge concentrations and will re-suspend of settled ...
Premium
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Radial Aspiration and Mixing floatable material with downdraft flow and dual action impeller. The homogenization phase allows re-entrainment with the biological process. FRED units prevent settlement and crust formation as well as mixing the entire basin. Nothing is discharged from the basin. Applicable for Viscous + sludge bulking applications and grease trap systems upstream of biological ...
Premium
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
The FRMD is used to remove the upper layer of foam, oil or fats. The natural flow within the basin, together with the suction of the pump, attracts the surface of the water towards the center of the FRMD. An adaptable floating weir allows the upper layer to enter the pump and be removed from the basin. The weir and the submersible pump are mounted on a robust floating structure held in place by ...
Premium
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Specifically designed for fixed or Float mounting which allow impeller immersion to vary in accordance with flow levels and associated oxygen demand. Ideal for Oxidation Ditches and Pocket ...
Premium
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
To assist bio-digestion FB aspirates and breaks high volumes of foam forming on the surface of some biological and thermophilic reactors. Foam is drawn into the volute where the degassing tube allows air to vent to atmosphere and liquid to re-entrain. Nothing is discharged from the basin. Applicable in high foam treating biological reactors, high foaming influent, thermophilic reactors, ...
Premium
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Specifically designed for fixed or Float mounting which allow impeller immersion to vary in accordance with flow levels and associated oxygen demand. Ideal for Oxidation Ditches and Pocket ...
Premium
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Exceptional mixing performance for both low and high solids concentration solutions. Intensive, low-energy, 360 - degree mixing pattern and totally non-clogging ...
Premium
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Open, two-bladed helical impeller providing intensive radial, sub-surface mixing pattern with minimal surface disturbance and extremely low power to volume ...
Manufactured by:Aeris Global Limited based inWanaka, NEW ZEALAND
As a bottom mounted aerator and with intensive mixing action it is ideal for deep tanks, moderate to high solids concentrations and also re-suspension of settled solids. Available with or without channels and in self-aspirating and blower versions depending on basin dimensions and oxygen demand. ...
Manufactured by:Aeris Global Limited based inWanaka, NEW ZEALAND
Specifically designed for fixed mounting to allow impeller immersion to vary in accordance with flow and associated oxygen demand. Maintains aeration efficiency at variable speed. Four impeller options – 4-blade, to induce circulation in oxidation ditches, and 6-blade, for higher efficiency; LH or RH. ...
Manufactured by:Aeris Global Limited based inWanaka, NEW ZEALAND
Totally independent aerator and mixer. Blower operation and frequency can regulate oxygen supply from zero to maximum capacity, whilst retaining full mixing and oxygen dispersion capability, therefore ideal for SBR, MBR reactors. Available as submerged drive or surface drive with extended shaft. ...
Manufactured by:Aeris Global Limited based inWanaka, NEW ZEALAND
Axial flow aerator with patented instantaneous radial discharge. World renowned for high aeration efficiency in field conditions due to maximum transfer of kinetic energy to water surface. Installations range from small tanks to massive lagoons due to exceptional mixing and oxygen dispersion. ...
Manufactured by:Aeris Global Limited based inWanaka, NEW ZEALAND
Aspirator aerator featuring a unique impeller and vacuum chamber design drawing air below water level and dispersing as micro-bubbles in any chosen direction. Ideal when aeration and directional flow generation are required in a single unit. Multiple mounting options allow use in any basin geometry. ...