- Home
- Equipment
Refine by
Bap Environmental Equipment & Supplies
17 equipment items found
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
Crest according DIN 19558 with downflow baffle for plug-fixing to grouted-in anchor rail. Adjustable overfall weirs in any dimension with the require drives in stainless steel, aluminium and ...
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
Butterfly valves in different body types and overall legth. Body made of GG 25 (EN JL 1040), GGG 40 (EN JL 1030), cast steel or weldet type. Disks in similar material. Seat EPDM, NBR, Viton or metal (only BAP ...
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
Dashplates, wallpipes and pipe fittings for wall mounted or casting in. In stainless steel, steel and cast iron (only wall pipes and pipe fittings) Dimensions from DN 50 up to DN 1800 an ...
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
Non-return valve with counter-weight, ordinary or flouting hollow lid, for wall mounting, with flange connection, wall anchor or push-in connection piece. Materials: stainless steel, aluminium, steel and cast ...
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
Logs, Frames, Mobie frames, Lifting device for stop ...
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
Swing check valves in different body types and overall length. Body made off GG 25 (EN JL 1040), GGG 40 (EN JL 1030), cast steel and stainless steel. Disks in similar materials. Variations with counter-weight, hydralic damper spring- or by pass. Soft or hard seated if required. Overall length: F4 (DIN 3202), basic series 14 (DIN 588-1), F5 (DIN 3202-1), basic series15 (DIN ...
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
Penstocks in round, square or rectangular model. Materials: stainless steel, aluminium, steel and cast iron. In the nominal widths. DN 100 - 2000 and above. Also as regulation valve version ...
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
Lowering penstock gate in rectangular or special profiles. Materials: stainless steel, aluminium and steel. In the dimensions b x h 100 x 100 up to 2000 x 2000 and ...
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
Flushing valve: round, sqaure or rectangular model with grab handle. Materials: stainless steel, aluminium and ...
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
Kife gate valves in different body types and overfall lentgh. One or double side seated knife gate valves available. Body in GG 25 (EN JL 1040), GGG 40 (EN JL 1030), 1.4408 and steel or stainless steel welded. Shut plates standard made of stainless ...
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
Draw-off pentsock: ruound, square or rectangular model with grad handle. Materials: stainless steel, aluminium, steel and cast ...
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
BAP float throttle device is a perfected conception on throttle and control the storage level regulation. Mainly used for the outllet of rain catchment basins, channels and sewage plant inlets. BAP float throttle device are made of stainless steel in combination with high quality polymers like PA and ...
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
Distributors of various types for grouting in or plugging, with self-locking worm gear pir with hand or actuating drive. Merials: stainless steel, aluminium and ...
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
Sluice valve for grouting in or wall mounted, rectangular or special profils. Materials: stainless steel, aluminium and steel. In the dimensions b x h 100 x 100 up to 2000 x 2000 and above. Also as four sided sealing form ...
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
Gate valves in different body types and overfall length. Body made of GG25 (EN JL 1040), GGG 40 (EN JL 1030), 1.4408 or cast steel. Overall length: F4 (DIN 3202), basic series 14 (DIN 588-1), F5 (DIN 3202-1), basic series 15 (DIN ...
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
Flanged joints in diiferent types and overall length. Size from DN 50 up to 1800 and above. Fixable and non fixable types. Flange connection according EN 1092-2 PN 10. Nominal pressure from PN 2 up to PN 100. Flange joints made of stainless steel, steel and cast ...
Manufactured by:BAP Abwassertechnik GmbH based inBünde, GERMANY
Stop gates for grouting in or wall mounted, rectangular or special profils. Materials: stainless steel, aluminium, and steel. In the dimensions b x h 100 x 100 up to 2000 x 2000 and ...