- Home
- Equipment
Refine by
Beringer Environmental Equipment & Supplies
7 equipment items found
Manufactured by:Beringer GmbH based inTagmersheim, GERMANY
Height: 750 – 1250 mm. Manufactured according to DIN 30 722. Convex side panels. Bottom (4 mm), sidewalls, front and doors (3 mm) made of S 460 MC. Hook ø 60 mm. Sub frame made of IPN 180. Double twin door with middle lock. Rollers with grease nipples ø 160 mm. Set of net hooks welded all around. Ladder at front side (optional). Additional lock for safety door opening ...
Manufactured by:Beringer GmbH based inTagmersheim, GERMANY
Manufactured according to DIN 30 720 for chain-loader systems asymmetric;. Bottom plate 6 mm. Side wall plates 4 mm. Welded inside and outside without holes,. Sheer rail for higher stability;. Perforated strip (galvanized) for load safety,. Heavy duty tipping profile,. Edges double welded, triple tipping device on both sides; set of net hooks welded all around,. Primed and coated in RAL colour of ...
Manufactured by:Beringer GmbH based inTagmersheim, GERMANY
Height 1500 mm. Manufactured according to DIN 30 722. Two convex side panels. Bottom made of wear-resistant steel 450 HBW (4 mm). Sidewalls, front and doors made of wear-resistant steel 450 HBW (3 mm). Hook ø 60 mm. Sub frame made of IPN 180. Additional fiber belt made of wear-resistant steel 450 HBW (3 mm). Top frame made of special pipe 125/95/8 (S 355). Rollers with grease nipples ...
Manufactured by:Beringer GmbH based inTagmersheim, GERMANY
Mobile compactor for chain-loader systems according to DIN 30 730. Smoothline construction, conicalshape. With silence pump. Feed opening 835 x 1500 ...
Manufactured by:Beringer GmbH based inTagmersheim, GERMANY
Manufactured according to DIN 30 720, For chain-loader systems, Asymmetric; Welded inside and outside without holes; Bottom plate 6 mm, Side wall plates 4 mm, Sheer rail for higher stability; Perforated strip (galvanized) for load safety, Bottom plate 6 mm, Side wall plates 4 mm, Triple tipping device on both sides, Set of net hooks welded all around, Foldable front wall traversable; Primed and ...
Manufactured by:Beringer GmbH based inTagmersheim, GERMANY
Compactor for hook-lift systems manufactured according to DIN 30 730. Smoothline construction conical shape. With silent pump. Feed opening 1000 x 18600 mm in front of plunger. SPS control. With radial sheets (left & right). Primed and coated in RAL colour of your ...
Manufactured by:Beringer GmbH based inTagmersheim, GERMANY
Manufactured according to DIN 30 738 /. EN 12 574. Hot dip galvanized. With crimped sidewalls. Easy maneuvering even on rough surface with castors (2 swivel, 2 fix). Fork-lift pockets (welded) made of 6 mm steel sheets. Lid with swinging ...